TB67H410FTG , TB67H410NG
TOSHIBA BiCD Integrated Circuit Silicon Monolithic
TB67H410FTG, TB67H410NG
PWM Chopper-Type B...
TB67H410FTG , TB67H410NG
TOSHIBA BiCD Integrated Circuit Silicon Monolithic
TB67H410FTG, TB67H410NG
PWM Chopper-Type Brushed DC Motor driver
The TB67H410 is brushed DC motor driver of a PWM chopper-type. The TB67H410 is a dual channel H-SW driver which can control two brushed DC motors. Moreover, the parallel control function (La rge mode) of an output part is built in, and 1ch high current drive is also possible.Fabricated with the BiCD process, the TB67H410 is maximum rated at 50V,2.5A(2ch)/5.0A(1ch).
Features
・Monolithic motor driver using BiCD process. ・Capable of controlling two brushed DC motor. ・2 drive modes (PWM controlled constant-current/ direct PWM) ・4 operation modes (Clock-wise/Counter clock-wise/Brake/Stop(Off)) ・Low on-resistance output stage (High side+Low side:0.8Ω(typ.)) ・High voltage and current (for specification, please refer to absolute
maximum ratings and operating ranges.) ・Built-in error detection circuits (Thermal shutdown(TSD), over-current
detection (ISD), and power-on reset (POR). ・Built-in
regulator allows the TB67H410 to function with a single VM
power supply. ・Able to customize PWM (internal chopping) frequency by external
components. ・Multi package lineup.
TB67H410FTG: P-WQFN48-0707-0.50-003 TB67H410NG: P-SDIP24-0723-1.78-001
FTG
P-WQFN48-0707-0.50-003 Weight: 0.10g (typ.)
NG
P-SDIP24-0723-1.78-001 Weight: 1.3g (typ.)
Note: Please be careful about the thermal conditions during use.
©2014 Toshiba Corporation
1
2015-1-27
Pin assignment ...