PIC18LF45K50

PIC18(L)F2X/45K50 28/40/44-Pin, Low-Power, High-Performance Microcontrollers with XLP Technology Universal Serial Bus Features: USB V2.0 Compliant Crystal-less Full Speed (12 Mb/s) and Low-Speed Operation (1.5 Mb/s) Supports Control, Interrupt, Isochronous and Bulk Transfers Supports up to 32 Endpoints (16 Bidirectional) 1 Kbyte Dual Access RAM for USB On-Chip USB Transceiver Flexible Oscillator Structure: 3x and 4xPLL Clock Multipliers Two External Clock modes, Up to 48 MHz (12 MIPS) Internal 31 kHz Oscillator Internal Oscillator, 31 kHz to 16 MHz - Factory calibrated to ± 1% - Self-tune to ± 0.20% max. from USB or secondary oscillator Secondary Oscillator using Timer1 @ 32 kHz Fail-Safe Clock Monitor: - Allows for safe shutdown if any clock stops Peripheral Highlights: Up to 33 I/O pins plus 3 Input-Only Pins: - High-current Sink/Source 25 mA/25 mA - Three programmable external interrupts - 11 programmable interrupts-on-change - Nine programmable weak pull-ups - Programmable slew rate SR Latch Enhanced Capture/Compare/PWM (ECCP) module: - One, two or four PWM outputs - Selectable polarity - Programmable dead time - Auto-shutdown and auto-restart - Pulse steering control Capture/Compare/PWM (CCP) module Master Synchronous Serial Port (MSSP) module Supporting 3-Wire SPI (all four modes) and I2C™ Master and Slave modes Two Analog Comparators with Input Multiplexing 10-Bit Analog-to-Digital (A/D) Converter module: - Up to 25 input channel...