74ALVT162821

74ALVT162821 20-bit bus interface D-type flip-flop; positive-edge trigger with 30 Ω termination resistors; 3-state Rev. 5 — 19 October 2020 Product data sheet 1. General description The 74ALVT162821 is a 20-bit positive-edge triggered D-type flip-flop with 30 Ω termination resistors and 3-state outputs The device can be used as two 10-bit flip-flops or one 20-bit flip-flop. The device features two clocks (1CP and 2CP) and two output enables (1OE and 2OE), each controlling 10-bits. The flip-flops will store the state of their individual D-inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (nCP) transition. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Operation of the nOE input does not affect the state of the flip-flops. Bus hold data inputs eliminate the need for external pull-up resistors to define unused inputs 2. Features and benefits Wide supply voltage range from 2.3 V to 3.6 V Overvoltage tolerant inputs to 5.5 V BiCMOS high speed and output drive Outputs include series resistance of 30 Ω making external termination resistors unnecessary No bus current loading when output is tied to 5 V bus Direct interface with TTL levels IOFF circuitry provides partial Power-down mode operation 20-bit positive-edge triggered register 5 V I/O compatible Multiple VCC and GND pins minimize switching noise Bus hold on data inputs Live insertion and extraction permitted Power-up reset Power-up 3-state ...