Document
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount
HXCSeries
・High reliability and high voltage are realized by hybrid electrolyte ・Endurance with ripple current : 4,000 hours at 125℃ ・Rated voltage range : 16 to 63Vdc, Capacitance range : 6.8 to 470μF ・For high temperature and high reliability applications.
(Automotive equipment, Base station equipment, etc.)
・RoHS2 Compliant ・Halogen Free ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information.
HXC
Higher temperature HXD
◆SPECIFICATIONS
Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance
Shelf Life
Bias Humidity Test
Characteristics
-55 to +125℃
16 to 63Vdc
±20% (M)
I=0.01CV
Where, I : Max. leakage current (μA), C: Nominal capacitance(μF), V : Rated voltage(V)
Rated voltage(Vdc)
16V 25V 35V 50V 63V
tanδ(Max.)
0.16 0.14 0.12 0.10 0.08
(at 20℃, 120Hz) (at 20℃ after 2 minutes)
(at 20℃, 120Hz)
Z(-25℃)/Z(+20℃)≦1.5 Z(-55℃)/Z(+20℃)≦2.0
(at 100kHz)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 4,000 hours at 125℃.
Capacitance change
≦±30% of the initial value
D.F. (tanδ)
≦ 200% of the initial specified value
ESR
≦ 200% of the initial specified value
Leakage current
≦ The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 125℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to item 4.1 of JIS C 5101-4.
Capacitance change
≦±30% of the initial value
D.F. (tanδ)
≦ 200% of the initial specified value
ESR
≦ 200% of the initial specified value
Leakage current
≦ The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 85℃, 85% RH for 2,000 hours.
Appearance
No significant damage
Capacitance change
≦ ±30% of the initial value
D.F.(tanδ)
≦ 200% of the initial specified value
ESR
≦ 200% of the initial specified value
Leakage current
≦ The initial specified value
φD±0.5 B±0.2 P C±0.2 φD±0.5 B±0.2 P C±0.2
◆DIMENSIONS [mm] ● Terminal Code : A ● Size code : E61 to JA0
Vent for JA0
W
0.3max.
A±0.2
L±0.3 (Note)
Note : L±0.5 for HA0 and JA0
● Terminal Code : G(Vibration resistant structure)
● Size code : HA0 and JA0
Vent for JA0
0.3max.
W
Size Code φD L A B C
E61 5 5.8 5.3 5.3 5.9
F61 6.3 5.8 6.6 6.6 7.2
F80 6.3 7.7 6.6 6.6 7.2
HA0
8 10.0 8.3 8.3 9.0
JA0 10 10.0 10.3 10.3 11.0
W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1
L±0.5
A±0.2
P 1.4 1.9 1.9 3.1 4.5
: Dummy terminals
◆PART NUMBERING SYSTEM
1 234 567
H HXC
8 9 10 11 12 13 14 15 16 17 18
RA M G
Supplement code Size code
Capacitance tolerance code Capacitance code (ex. 47µF:470, 100µF:101)
Taping code Terminal code Voltage code (ex. 35V:350, 50V:500)
Series code Category
Please refer to "Product code guide (conductive polymer hybrid type)"
◆MARKING
EX) 35V270µF
47E
270 V HC
●Rated voltage symbol
Rated voltage (Vdc) 16 25 35 50 63
Symbol C E V H J
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001T
CONDUCTIVE POLYMER HYBRID ALUMINUM ELECTROLYTIC CAPACITORS Surface Mount
HXCSeries
◆STANDARD RATINGS
WV (Vdc)
Cap (µF)
Size code
47
82
16 150
270
470
33
47
56
68
25 100
150
220
270
330
22
27
47
47
35 68
100
150
150
270
10
15
22
33
50
33 47
56
68
100
120
6.8
10
10
22
63
22 33
33
47
56
82
E61 F61 F80 HA0 JA0 E61 F61 F61 F80 F80 HA0 HA0 JA0 JA0 E61 F61 F61 F80 F80 HA0 HA0 JA0 JA0 F61 F80 F61 F80 HA0 HA0 JA0 HA0 JA0 JA0 F61 F61 F80 F80 HA0 HA0 JA0 HA0 JA0 JA0
□ : Enter the appropriate terminal code.
ESR (mΩmax./20℃, 100kHz)
80 45 27 22 18 80 50 50 30 30 27 27 20 20 100 60 60 35 35 27 27 20 20 80 40 80 40 30 30 25 30 25 25 120 120 80 80 40 40 30 40 30 30
Rated ripple current (mArms/125℃, 100kHz)
550 950 1,450 1,700 2,100 550 900 900 1,400 1,400 1,600 1,600 2,000 2,000 550 900 900 1,400 1,400 1,600 1,600 2,000 2,000 750 1,100 750 1,100 1,250 1,250 1,600 1,250 1,600 1,600 700 700 900 900 1,100 1,100 1,400 1,100 1,400 1,400
◆RATED RIPPLE CURRENT MULTIPLIERS
・Frequency Multipliers
Capacitance(µF)
Frequency(Hz)
to 10
15 to 33
47 to 150
220 to 470
120 0.03 0.07 0.10 0.13
1k 0.30 0.30 0.40 0.45
5k 0.50 0..