KX8530

SMD Type PFM Step-up DC/DC Converter With High Efficiency And Low Noise KX8530 IC Outline The KX8530 series are CMOS-based PFM step-up DC-DC Converter. The converter can start up by supply voltage as low as 0.8V, and capable of delivering maximum 200mA output current at 3.3V output with 1.8V input Voltage. Quiescent current drawn from power source is as low as 7uA. All of these features make KX8530 series be suitable for the portable devices, which are supplied by a single battery to four-cell batteries. To reduce the noise caused by the switch regulator, KX8530 is well considerated in circuit design and manufacture. So that the interferer to other circuits by the device is reduced greatly. KX8530 integrates stable reference circuits and trimming technology, so it can afford high precision and low temperature-drift coefficient of the output voltage. KX8530 is available in SOT-89 SOT-23 and SOT-153 packages which is PB free. And in 5-pin packages, such as SOT-153, the device can be switch on or off easily by CE pin, to minimize the standby supply current. PIN Configuration Features Deliver 200mA at 3.3V Output voltage with 1.8V input Voltage Low start-up voltage (when the output current is 1mA)----------------------------------------------0.8V The converter output voltage can be adjusted from 2.5V 6.0V(In 0.1V step). Output voltage accuracy ----------------------±2% Low temperature-drift coefficient of the output voltage-----------------------------------±100ppm/ Only three...