PIC32MK1024MCF100

PIC32MK GENERAL PURPOSE AND MOTOR CONTROL (GP/MC) FAMILY 32-bit General Purpose and Motor Control Application MCUs with FPU and up to 1 MB Live-Update Flash, 256 KB SRAM, 4 KB EEPROM, and Op amps Operating Conditions: 2.2V to 3.6V -40ºC to +85ºC, DC to 120 MHz -40ºC to +125ºC, DC to 80 MHz Core: 120 MHz (up to 198 DMIPS) MIPS32® microAptiv™ MCU core with Floating Point Unit microMIPS™ mode for up to 40% smaller code size DSP-enhanced core: - Four 64-bit accumulators - Single-cycle MAC, saturating and fractional math Code-efficient (C and Assembly) architecture Two 32-bit core register files to reduce interrupt latency Clock Management 8 MHz ±5% (FRC) internal oscillator 0ºC to +70ºC Programmable PLLs and oscillator clock sources: - HS and EC clock modes Secondary USB PLL 32 kHz Internal Low-power RC oscillator (LPRC) Independent external low-power 32 kHz crystal oscillator Fail-Safe Clock Monitor (FSCM) Independent Watchdog Timers (WDT) and Deadman Timer (DMT) Fast wake-up and start-up Four Fractional clock out (REFCLKO) modules Power Management Low-power management modes (Deep Sleep, Sleep, and Idle) Integrated: - Power-on Reset (POR) and Brown-out Reset (BOR) On-board capacitorless regulator Motor Control PWM Eight PWM pairs Six additional Single-Ended PWM modules Dead Time for rising and falling edges Dead-Time Compensation 8.33 ns PWM Resolution Clock Chopping for High-Frequency Operation PWM Support for: - DC/DC, AC/DC...