64-Mbit Serial Quad I/O (SQI) Flash Memory
SST26VF064BEUI
64 Mbit Serial Quad I/O (SQI) Flash Memory with EUI-48™ and EUI-64™ Identifier
Features
• Factory-Progr...
Description
SST26VF064BEUI
64 Mbit Serial Quad I/O (SQI) Flash Memory with EUI-48™ and EUI-64™ Identifier
Features
Factory-Programmed with EUI-48 and EUI-64 Globally Unique Identifier - Secure, read-only access in Serial Flash Discoverable Parameter (SFDP) table
Single Voltage Read and Write Operations - 2.7-3.6V or 2.3-3.6V
Serial Interface Architecture - Nibble-wide multiplexed I/O’s with SPI-like serial command structure - Mode 0 and Mode 3 - x1/x2/x4 Serial Peripheral Interface (SPI) Protocol
High Speed Clock Frequency - 2.7-3.6V: 104 MHz max - 2.3-3.6V: 80 MHz max
Burst Modes - Continuous linear burst - 8/16/32/64 Byte linear burst with wrap-around
Superior Reliability - Endurance: 100,000 Cycles (min) - Greater than 100 years Data Retention
Low Power Consumption: - Active Read current: 15 mA (typical @ 104 MHz) - Standby Current: 15 µA (typical)
Fast Erase Time - Sector/Block Erase: 18 ms (typ), 25ms (max) - Chip Erase: 35 ms (typ), 50 ms (max)
Page-Program - 256 Bytes per page in x1 or x4 mode
End-of-Write Detection - Software polling the BUSY bit in status register
Flexible Erase Capability - Uniform 4 KByte sectors - Four 8 KByte top and bottom parameter overlay blocks - One 32 KByte top and bottom overlay block - Uniform 64 KByte overlay blocks
Write-Suspend - Suspend Program or Erase operation to access another block/sector
Software Reset (RST) mode Software Protection
- Individual-Block Write Protection with permanent
lock-down capability
- 64 K...
Similar Datasheet