BT136-600D

BT136-600D 4Q Triac Rev.02 - 17 May 2019 Product data sheet 1. General description Planar passivated very sensitive gate four quadrant triac in a TO220 plastic package intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. This very sensitive gate "series D" triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits. 2. Features and benefits Direct triggering from low power drivers and logic ICs High blocking voltage capability Low holding current for low current loads and lowest EMI at commutation Planar passivated for voltage ruggedness and reliability Triggering in all four quadrants Very sensitive gate 3. Applications General purpose motor controls General purpose switching 4. Quick reference data Table 1. Quick reference data Symbol Parameter Absolute maximum rating Conditions VDRM repetitive peak off-state voltage IT(RMS) RMS on-state current full sine wave; Tmb ≤ 107 °C; Fig. 1; Fig. 2; Fig. 3 ITSM non-repetitive peak on- full sine wave; Tj(init) = 25 °C; tp = 20 ms; state current Fig. 4; Fig. 5 full sine wave; Tj(init) = 25 °C; tp = 16.7 ms Tj junction temperature Symbol Parameter Conditions Static characteristics IGT gate trigger current VD = 12 V; IT = 0.1 A; T2+ G+; Tj = 25 °C; Fig. 7 VD = 12 V; IT = 0.1 A; T2+ G-; Tj = 25 °C; Fig. 7 Values Unit 600 V ...