Photomicrosensor
Photomicrosensor (Reflective)
EE-SY171
Be sure to read Precautions on page 24.
■ Dimensions
Note: All units are in mil...
Description
Photomicrosensor (Reflective)
EE-SY171
Be sure to read Precautions on page 24.
■ Dimensions
Note: All units are in millimeters unless otherwise indicated.
Two, 2 dia.
Two, 1.2 dia. Anode mark
Four, 0.5
0° to 30°
Four, 0.25
Internal Circuit
A C Unless otherwise specified, the tolerances are as shown below.
■ Features
3-mm-tall, thin model Recommended sensing distance = 3.5 mm
■ Absolute Maximum Ratings (Ta = 25°C)
Emitter
Item Forward current
Pulse forward current
Reverse voltage
Detector
Collector–Emitter voltage
Emitter–Collector voltage
Collector current
Collector dissipation
Ambient tem- Operating
perature
Storage
Soldering temperature
Symbol IF
IFP
VR VCEO
VECO
IC PC
Topr Tstg Tsol
Rated value 50 mA (see note 1) 1A (see note 2) 4V 30 V
---
20 mA 100 mW (see note 1) –40°C to 85°C –40°C to 85°C 260°C (see note 3)
KE
Terminal No. Name A Anode K Cathode C Collector E Emitter
Dimensions
3 mm max.
3 < mm ≤ 6 6 < mm ≤ 10 10 < mm ≤ 18 18 < mm ≤ 30
Tolerance
±0.3 ±0.375 ±0.45 ±0.55 ±0.65
Note: 1. Refer to the temperature rating chart if the ambient temperature exceeds 25°C.
2. The pulse width is 10 μs maximum with a frequency of 100 Hz.
3. Complete soldering within 10 seconds.
■ Electrical and Optical Characteristics (Ta = 25°C)
Emitter Detector
Item Forward voltage Reverse current Peak emission wavelength Light current
Symbol VF IR λP IL
Value 1.2 V typ., 1.5 V max. 0.01 μA typ., 10 μA max. 940 nm typ. 50 μA min., 500 μA max.
Rising time Fall...
Similar Datasheet