X-tal driver
74LVC1GX04
X-tal driver
Rev. 5 — 26 January 2022
Product data sheet
1. General description
The 74LVC1GX04 is a crystal...
Description
74LVC1GX04
X-tal driver
Rev. 5 — 26 January 2022
Product data sheet
1. General description
The 74LVC1GX04 is a crystal driver. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments.
Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.
This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.
2. Features and benefits
Wide supply voltage range from 1.65 V to 5.5 V Overvoltage tolerant inputs to 5.5 V High noise immunity ±24 mA output drive (VCC = 3.0 V) CMOS low power dissipation Direct interface with TTL levels IOFF circuitry provides partial Power-down mode operation Latch-up performance exceeds 250 mA Complies with JEDEC standard:
JESD8-7 (1.65 V to 1.95 V) JESD8-5 (2.3 V to 2.7 V) JESD8C (2.7 V to 3.6 V) JESD36 (4.5 V to 5.5 V) ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V Specified from -40 °C to +85 °C and -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
74LVC1GX04GW -40 °C to +125 °C TSSOP6
74LVC1GX04GV -40 °C to +125 °C SC-74; TSOP6
Description
plastic thin shrink small outline package; 6 leads; body width 1.25 mm
plastic surface-m...
Similar Datasheet