LTM4638 20VIN, 15A Step-Down DC/DC
µModule Regulator
FEATURES
n Complete Solution in <1cm2 (Single-Sided PCB) or 0.5cm2...
LTM4638 20VIN, 15A Step-Down DC/DC
µModule
Regulator
FEATURES
n Complete Solution in <1cm2 (Single-Sided PCB) or 0.5cm2 (Dual-Sided PCB)
n 6.25mm × 6.25mm × 5.02mm BGA Package n Wide Input Voltage Range: 3.1V to 20V n 0.6V to 5.5V Output Voltage n 15A DC Output Current n ±1.5% Maximum Total DC Output Voltage Error
Over Line, Load and Temperature n Differential Remote Sensing Amp n Current Mode Control, Fast Transient Response n External Frequency Synchronization n Multiphase Parallel Current Sharing with
Multiple LTM4638s n Output Voltage Tracking n Selectable Discontinuous Mode n Power Good Indicator n Overvoltage, Overcurrent and Overtemperature
Protection
APPLICATIONS
n Telecom, Datacom, Networking and Industrial Equipment
n Medical Diagnostic Equipment n Data Storage Rack Units and Cards n Test and Debug Systems
DESCRIPTION
The LTM®4638 is a complete 15A step-down switching mode µModule (power module)
regulator in a tiny 6.25mm × 6.25mm × 5.02mm BGA package. Included in the package are the switching controller, power FETs, inductor and support components. Operating over an input voltage range of 3.1V to 20V, the LTM4638 supports an output voltage range of 0.6V to 5.5V, set by a single external resistor. Its high efficiency design delivers up to 15A continuous output current. Only bulk input and output capacitors are needed. The LTM4638 product video is available on the website.
The LTM4638 supports selectable discontinuous mode operation and output voltage tracking for ...