Single supply translating buffer/line driver
74LV1T125
Single supply translating buffer/line driver; 3-state
Rev. 4 — 16 August 2022
Product data sheet
1. Genera...
Description
74LV1T125
Single supply translating buffer/line driver; 3-state
Rev. 4 — 16 August 2022
Product data sheet
1. General description
The 74LV1T125 is a single, level translating buffer/line driver with 3-state output. The low threshold inputs support 1.8 V input logic at VCC = 3.3 V and can be used in 1.8 V to 3.3 V level up translation. In addition, the 5 V tolerant input pins enable down translation (3.3 V to 2.5 V output at VCC = 2.5 V). The 3-state output is controlled by the output enable input (OE). A HIGH-level at OE causes the output to assume a high-impedance OFF-state. The output level is referenced to the supply voltage and supports 1.8 V, 2.5 V, 3.3 V and 5.0 V CMOS levels. The wide VCC range permits the generation of output levels to connect to controllers or processors.
2. Features and benefits
Single supply voltage translator at 1.8 V, 2.5 V, 3.3 V and 5.0 V Up translation
1.2 V to 1.8 V at VCC = 1.8 V 1.5 V to 2.5 V at VCC = 2.5 V 1.8 V to 3.3 V at VCC = 3.3 V 3.3 V to 5.0 V at VCC = 5.0 V Down translation 3.3 V to 1.8 V at VCC = 1.8 V 3.3 V to 2.5 V at VCC = 2.5 V 5.0 V to 3.3 V at VCC = 3.3 V 5 V tolerant inputs Latch-up performance exceeds 250 mA per JESD 78 Class II ESD protection: HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV CDM JESD22-C101 exceeds 1 kV Specified from -40 °C to +85 °C and from -40 °C to +125 °C
3. Applications
Portable applications PC and notebooks Industrial controller Telecom
Nexperia
74LV1T...
Similar Datasheet