3.3V octal transceiver
74LVT245B
3.3 V octal transceiver with direction pin; 3-state
Rev. 3 — 30 July 2021
Product data sheet
1. General de...
Description
74LVT245B
3.3 V octal transceiver with direction pin; 3-state
Rev. 3 — 30 July 2021
Product data sheet
1. General description
The 74LVT245B is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Bus hold data inputs eliminate the need for external pull-up resistors to define unused inputs
2. Features and benefits
Wide supply voltage range from 2.7 to 3.6 V 3-state buffers Octal bidirectional bus interface Overvoltage tolerant inputs to 5.5 V Direct interface with TTL levels BiCMOS high speed and output drive Output capability: +64 mA/-32 mA Latch-up protection exceeds 500 mA per JEDEC Std 17 Bus-hold data inputs eliminate the need for external pull-up resistors for unused inputs No bus current loading when output is tied to 5 V bus Live insertion/extraction permitted Power-up 3-state IOFF circuitry provides partial Power-down mode operation Complies with JEDEC standard JESD8C (2.7 V to 3.6 V) ESD protection:
HBM JESD22-A114E exceeds 2000 V MM JESD22-A115-A exceeds 200 V Specified from -40 °C to 85 °C
3. Ordering information
Table 1. Ordering information Type number Package
Temperature range Name
Description
74LVT245BD -40 °C to +85 °C
SO20
plastic small outline package; 20 leads; body width 7.5 mm
74LVT245BPW -40 °C to +85 °C
TSSOP20 plastic thin shrink small outline package; 20 l...
Similar Datasheet