Dual buffer/line driver
74AHC2G126; 74AHCT2G126
Dual buffer/line driver; 3-state
Rev. 8 — 19 November 2018
Product data sheet
1. General desc...
Description
74AHC2G126; 74AHCT2G126
Dual buffer/line driver; 3-state
Rev. 8 — 19 November 2018
Product data sheet
1. General description
The 74AHC2G126 and 74AHCT2G126 are high-speed Si-gate CMOS devices. They provide a dual non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input (nOE). A LOW at nOE causes the output to assume a high-impedance OFFstate.
The AHC device has CMOS input switching levels and supply voltage range 2 V to 5.5 V.
The AHCT device has TTL input switching levels and supply voltage range 4.5 V to 5.5 V.
2. Features and benefits
Symmetrical output impedance High noise immunity Low power dissipation Balanced propagation delays ESD protection:
HBM JESD22-A114E: exceeds 2 000 V MM JESD22-A115-A: exceeds 200 V CDM JESD22-C101C: exceeds 1 000 V Specified from -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
74AHC2G126DP
-40 °C to +125 °C TSSOP8
74AHC2G126DC 74AHCT2G126DC
-40 °C to +125 °C VSSOP8
Description
plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm
plastic very thin shrink small outline package; 8 leads; body width 2.3 mm
Version SOT505-2
SOT765-1
4. Marking
Table 2. Marking codes Type number 74AHC2G126DP 74AHC2G126DC 74AHCT2G126DC
Marking[1] A26 A26 C26
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
Nexperia
5. Funct...
Similar Datasheet