Bus buffer/line driver
74HC1G125; 74HCT1G125
Bus buffer/line driver; 3-state
Rev. 7 — 17 January 2022
Product data sheet
1. General descript...
Description
74HC1G125; 74HCT1G125
Bus buffer/line driver; 3-state
Rev. 7 — 17 January 2022
Product data sheet
1. General description
The 74HC1G125; 74HCT1G125 is a single buffer/line driver with 3-state output. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
2. Features and benefits
Wide supply voltage range from 2.0 V to 6.0 V CMOS low power dissipation High noise immunity Latch-up performance exceeds 100 mA per JESD 78 Class II Level B Input levels:
For 74HC1G125: CMOS level For 74HCT1G125: TTL level Symmetrical output impedance High noise immunity Balanced propagation delays Complies with JEDEC standards: JESD8C (2.7 V to 3.6 V) JESD7A (2.0 V to 6.0 V) ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V Specified from −40 °C to 85 °C and −40 °C to 125 °C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name Description
Version
74HC1G125GW 74HCT1G125GW
-40 °C to +125 °C
TSSOP5 plastic thin shrink small outline package; 5 leads; SOT353-1 body width 1.25 mm
74HC1G125GV
-40 °C to +125 °C SC-74A plastic surface-mounted package; 5 leads
SOT753
74HCT1G125GV
Nexperia
74HC1G125; 74HCT1G125
Bus buffer/line driver; 3-state
4. Marking
Table 2. Marking Type number 74HC1G125GW 74HCT1G125GW 74HC1G125GV 74HCT1G125GV
Marking code[1] HM TM H25 T25
[1] The pin 1 indicator is located on the lower le...
Similar Datasheet