Octal buffer/line driver
74HC241; 74HCT241
Octal buffer/line driver; 3-state
Rev. 4.1 — 25 October 2023
Product data sheet
1. General descripti...
Description
74HC241; 74HCT241
Octal buffer/line driver; 3-state
Rev. 4.1 — 25 October 2023
Product data sheet
1. General description
The 74HC241; 74HCT241 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on 1OE or LOW on 2OE causes the associated outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
The 74HCT241 device features reduced input threshold levels to allow interfacing to TTL logic levels.
2. Features and benefits
Wide supply voltage range from 2.0 to 6.0 V CMOS low power dissipation High noise immunity Latch-up performance exceeds 100 mA per JESD 78 Class II Level B Input levels:
For 74HC241: CMOS level For 74HCT241: TTL level Octal bus interface Non-inverting 3-state outputs Complies with JEDEC standards JESD8C (2.7 V to 3.6 V) JESD7A (2.0 V to 6.0 V) ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V Specified from −40 °C to +85 °C and −40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
74HC241D 74HCT241D
-40 °C to +125 °C SO20
74HC241PW 74HCT241PW
-40 °C to +125 °C TSSOP20
Description
plastic small outline package; 20 leads; body width 7.5 mm
plast...
Similar Datasheet