Octal buffer/line driver
74HC244; 74HCT244
Octal buffer/line driver; 3-state
Rev. 7 — 27 July 2021
Product data sheet
1. General description
Th...
Description
74HC244; 74HCT244
Octal buffer/line driver; 3-state
Rev. 7 — 27 July 2021
Product data sheet
1. General description
The 74HC244; 74HCT244 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC.
2. Features and benefits
Wide supply voltage range from 2.0 to 6.0 V CMOS low power dissipation High noise immunity Latch-up performance exceeds 100 mA per JESD 78 Class II Level B Input levels:
For 74HC244: CMOS level For 74HCT244: TTL level Octal bus interface Non-inverting 3-state outputs Complies with JEDEC standards: JESD8C (2.7 V to 3.6 V) JESD7A (2.0 V to 6.0 V) ESD protection: HBM JESD22-A114F exceeds 2000 V MM JESD22-A115-A exceeds 200 V Multiple package options Specified from -40 °C to +85 °C and -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range
74HC244D
-40 °C to +125 °C
74HCT244D
74HC244PW
-40 °C to +125 °C
74HCT244PW
74HC244BQ
-40 °C to +125 °C
74HCT244BQ
Name SO20
Description
plastic small outline package; 20 leads; body width 7.5 mm
TSSOP20 plastic thin shrink small outline package; 20 leads; body width 4...
Similar Datasheet