Dual FIFO UART and Parallel Port
Ei16C552 Dual FIFO UART and Parallel Port
FEATURES
• • • • IBM PC AT™ and PS/2™ compatible Dual channel version of Ei16...
Description
Ei16C552 Dual FIFO UART and Parallel Port
FEATURES
IBM PC AT™ and PS/2™ compatible Dual channel version of Ei16C550 with Centronics printer interface Independent control of transmit, receive, line status and data set interrupts on each channel Programmable serial interface characteristics for each channel: -5, 6, 7 or 8 bit characters -Even, odd or no parity bit generation and dectection -1, 1.5 or 2 stop bit generation Programmable baud rate generator divides CLK input by a divisor between 1 and (216 -1) Tri-State® TTL drive capability for bidirectional data bus and control bus on each channel 16 byte FIFO for receiver as well as for trans mitter. Advanced CMOS low power technology with single 5 volt supply
DESCRIPTION
The Ei16C552 is an enhanced dual channel version of the Ei16C550 Universal Asynchronous Receiver Transmitter (UART). The device serves two serial input/output interfaces simultaneously in microcomputer or microprocessor based systems. Each channel performs a serial-to-parallel conversion on data characters received from peripheral devices or modems, and a parallel-to-serial conversion on data characters transmitted by the CPU. The complete status of each channel of the dual UART can be read at any time during functional operation by the CPU. The information obtained includes the type and condition of the transfer operations being performed, and error conditions. In addition to its dual communications interface capabilities, the Ei16C552 provi...
Similar Datasheet