Quad buffer/line driver
74HC126-Q100; 74HCT126-Q100
Quad buffer/line driver; 3-state
Rev. 3 — 28 December 2022
Product data sheet
1. General ...
Description
74HC126-Q100; 74HCT126-Q100
Quad buffer/line driver; 3-state
Rev. 3 — 28 December 2022
Product data sheet
1. General description
The 74HC126-Q100; 74HCT126-Q100 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A LOW on nOE causes the outputs to assume a high impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from -40 °C to +85 °C and from -40 °C to +125 °C
Wide supply voltage range from 2.0 V to 6.0 V CMOS low power dissipation High noise immunity Latch-up performance exceeds 100 mA per JESD 78 Class II Level B Complies with JEDEC standards:
JESD8C (2.7 V to 3.6 V) JESD7A (2.0 V to 6.0 V) Input levels: For 74HC126-Q100: CMOS levels For 74HCT126-Q100: TTL levels ESD protection: HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2000 V
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range
74HC126D-Q100 74HCT126D-Q100
-40 °C to +125 °C
74HC126PW-Q100 -40 °C to +125 °C 74HCT126PW-Q100
Name SO14
TSSOP14
Description
Version
plastic small outline package; 14 leads; body width 3.9 mm
SOT108-1
plastic thin shrin...
Similar Datasheet