74HCT153-Q100

74HC153-Q100; 74HCT153-Q100 Dual 4-input multiplexer Rev. 5 — 13 August 2021 Product data sheet 1. General description The 74HC153-Q100; 74HCT153-Q100 is a dual 4-input multiplexer. The device features independent enable inputs (nE) and common data select inputs (S0 and S1). For each multiplexer, the select inputs select one of the four binary inputs and routes it to the multiplexer output (nY). A HIGH on E forces the corresponding multiplexer outputs LOW. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2. Features and benefits Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from -40 °C to +85 °C and from -40 °C to +125 °C Wide supply voltage range from 2.0 to 6.0 V CMOS low power dissipation High noise immunity Latch-up performance exceeds 100 mA per JESD 78 Class II Level B Input levels: For 74HC153-Q100: CMOS level For 74HCT153-Q100: TTL level Non-inverting outputs Separate enable input for each output Common select inputs Permits multiplexing from n lines to 1 line Enable line provided for cascading (n lines to 1 line) Complies with JEDEC standards: JESD8C (2.7 V to 3.6 V) JESD7A (2.0 V to 6.0 V) ESD protection: MIL-STD-883, method 3015 exceeds 2000 V HBM JESD22-A114...