Single D-type flip-flop
74LVC1G79-Q100
Single D-type flip-flop; positive-edge trigger
Rev. 3 — 1 February 2022
Product data sheet
1. General...
Description
74LVC1G79-Q100
Single D-type flip-flop; positive-edge trigger
Rev. 3 — 1 February 2022
Product data sheet
1. General description
The 74LVC1G79-Q100 is a single positive-edge triggered D-type flip-flop. Data at the D-input that meets the set-up and hold time requirements on the LOW-to-HIGH clock transition will be stored in the flip-flop and appear at the Q output. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments.
Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.
This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1) Specified from -40 °C to +85 °C and -40 °C to +125 °C
Wide supply voltage range from 1.65 V to 5.5 V Overvoltage tolerant inputs to 5.5 V High noise immunity CMOS low power dissipation ±24 mA output drive (VCC = 3.0 V) Direct interface with TTL levels Latch-up performance exceeds 250 mA IOFF circuitry provides partial Power-down mode operation Complies with JEDEC standard:
JESD8-7 (1.6...
Similar Datasheet