Document
74LVC2G07-Q100
Buffers with open-drain outputs
Rev. 4 — 24 January 2022
Product data sheet
1. General description
The 74LVC2G07-Q100 is a dual buffer with open-drain outputs. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
• Automotive product qualification in accordance with AEC-Q100 (Grade 1) • Specified from -40 °C to +85 °C and -40 °C to +125 °C
• Wide supply voltage range from 1.65 V to 5.5 V • Overvoltage tolerant inputs to 5.5 V • High noise immunity • CMOS low power dissipation • -24 mA output drive (VCC = 3.0 V) • Direct interface with TTL levels • IOFF circuitry provides partial Power-down mode operation • Latch-up performance exceeds 250 mA • Complies with JEDEC standard:
• JESD8-7 (1.65 V to 1.95 V) • JESD8-5 (2.3 V to 2.7 V) • JESD8C (2.7 V to 3.6 V) • JESD36 (4.5 V to 5.5 V) • ESD protection: • MIL-STD-883, method 3015 exceeds 2000 V • HBM JESD22-A114F exceeds 2000 V • MM JESD22-A115-A exceeds 200 V
Nexperia
74LVC2G07-Q100
Buffers with open-drain outputs
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range
74LVC2G07GW-Q100 -40 °C to +125 °C
Name TSSOP6
74LVC2G07GV-Q100 -40 °C to +125 °C
SC-74; TSOP6
Description
plastic thin shrink small outline package; 6 leads; body width 1.25 mm
plastic surface-mounted package; 6 leads
Version SOT363-2
SOT457
4. Marking
Table 2. Marking Type number 74LVC2G07GW-Q100 74LVC2G07GV-Q100
Marking code[1] V7 V07
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional diagram
1 1A
1Y 6
3 2A
2Y 4
mnb092
Fig. 1. Logic symbol
1A 1
6 1Y
2A 3
4 2Y
mnb093
Fig. 2. IEC logic symbol
Y
A GND mna591
Fig. 3. Logic diagram (one driver)
6. Pinning information
6.1. Pinning
74LVC2G07
1A 1
6 1Y
GND 2
5 VCC
2A 3
4 2Y
001aab670
Fig. 4. Pin configuration SOT363-2 (TSSOP6) and SOT457 (SC-74; TSOP6)
74LVC2G07_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 24 January 2022
© Nexperia B.V. 2022. All rights reserved
2 / 12
Nexperia
74LVC2G07-Q100
Buffers with open-drain outputs
6.2. Pin description
Table 3. Pin description
Symbol
Pin
1A
1
GND
2
2A
3
2Y
4
VCC
5
1Y
6
Description data input ground (0 V) data input data output supply voltage data output
7. Functional description
Table 4. Function table H = HIGH voltage level; L = LOW voltage level; Z = high-impedance OFF-state.
Input nA
Output nY
L
L
H
Z
8. Limiting values
Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Conditions
Min
Max Unit
VCC IIK VI IOK VO
IO ICC IGND Tstg Ptot
supply voltage input clamping current input voltage output clamping current output voltage
output current supply current ground current storage temperature total power dissipation
VI < 0 V VO < 0 V Active mode Power-down mode; VCC = 0 V VO = 0 V to 6.5 V
Tamb = -40 °C to +125 °C
-0.5
-50
[1] -0.5
-50
[1] -0.5
[1] -0.5
-
-
-100
-65
[2]
-
+6.5 V
-
mA
+6.5 V
-
mA
+6.5 V
+6.5 V
50 mA
100 mA
-
mA
+150 °C
250 mW
[1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For SOT363-2 (TSSOP6) package: Ptot derates linearly with 3.7 mW/K above 83 °C.
For SOT457 (SC-74; TSOP6) package: Ptot derates linearly with 4.1 mW/K above 89 °C.
74LVC2G07_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 4 — 24 January 2022
© Nexperia B.V. 2022. All rights reserved
3 / 12
Nexperia
74LVC2G07-Q100
Buffers with open-drain outputs
9. Recommended operating conditions
Table 6. Recommended operating conditions
Symbol
Parameter
Conditions
VCC
supply voltage
VI
input voltage
VO
output voltage
Active mode
Power-down mode; VCC = 0 V
Tamb
ambient temperature
Δt/ΔV
input transition rise and VCC = 1.65 V to 2.7 V
fall rate
VCC = 2.7 V to 5.5 V
Min Typ Max Unit
1.65
-
5.5 V
0
-
5.5 V
0
-
5.5 V
0
-
5.5 V
-40
-
+125 °C
-
-
20 ns/V
-
-
10 ns/V
10. Static characteristics
Table 7. Static characteristics At recommended operating conditions; voltages are referenced to GND (ground = 0 V).
Symbol Parameter
Conditions
Min
Tamb = -40 .