OPTICAL ENCODERS
OPTICAL ENCODERS
FEATURES
O φ12 mm, High resolution up to 300 P/R O Cost effective O Two bearing types to choose from;
S...
Description
OPTICAL ENCODERS
FEATURES
O φ12 mm, High resolution up to 300 P/R O Cost effective O Two bearing types to choose from;
Sleeve bearing or ball bearing O Low torque, low inertia O RoHS compliant
RE12
RoHS compliant
PART NUMBER DESIGNATION
RE12 A – 100 – 100 – 1
Series name
Bearing Ball bearing Sleeve bearing
Resolution (P/R)
Output connection Cable wire
Output phase “A”, Input voltage : 5 V, No AMP
LIST OF PART NUMBERS
Bearing
Resolution
Part number
Ball Bearing Sleeve Bearing
100 P/R 200 P/R 300 P/R 100 P/R 200 P/R 300 P/R
RE12A-100-100-1 RE12A-200-100-1 RE12A-300-100-1 RE12C-100-100-1 RE12C-200-100-1 RE12C-300-100-1
Verify the above part numbers when placing orders.
RE12
OPTICAL ENCODERS
STANDARD SPECIFICATIONS
O ELECTRICAL CHARACTERISTICS
Item Resolution s 02
02
Photo-sensor maximum current
50 mA maximum (at 25 °C)
Output wave form
Quasi-sinusoidal
Output signal
1 150 mVp-p minimum 100 mVp-p minimum
Output signal amplitude variation
2 40 % maximum 50 % maximum
Light source
LED
1 : Measured at CP1 as per the Fig. A of ‘MEASUREMENT CIRCUIT’ on the following page. (3 kHz)
2 : Measured at CP2 as per the Fig. A of ‘MEASUREMENT CIRCUIT’ on the following page. (3 kHz)
O Mechanical characteristics
Starting torque
Ball bearing Sleeve bearing
0.05 mN·m {0.5 gf·cm} maximum 0.4 mN·m {4 gf·cm} maximum
Inertia
0.01 g·cm2 maximum
Shaft loading
Radial Axial
1.96 N {200 gf} maximum 4.9 N {500 gf} maximum
Net weight
Approx. 10 g
O Output...
Similar Datasheet