DatasheetsPDF.com

ADG658 Dataheets PDF



Part Number ADG658
Manufacturers Analog Devices
Logo Analog Devices
Description CMOS 4-Channel Analog Multiplexers
Datasheet ADG658 DatasheetADG658 Datasheet (PDF)

Data Sheet +3 V/+5 V/±5 V CMOS 4- and 8-Channel Analog Multiplexers ADG658/ADG659 FEATURES ±2 V to ±6 V dual supply 2 V to 12 V single supply Automotive temperature range −40°C to +125°C <0.1 nA leakage currents 45 Ω on resistance over full signal range Rail-to-rail switching operation Single 8-to-1 multiplexer ADG658 Differential 4-to-1 multiplexer ADG659 16-lead LFCSP/TSSOP/QSOP packages Typical power consumption <0.1 μW TTL/CMOS compatible inputs Package upgrades to 74HC4051/74HC4052 and MA.

  ADG658   ADG658



Document
Data Sheet +3 V/+5 V/±5 V CMOS 4- and 8-Channel Analog Multiplexers ADG658/ADG659 FEATURES ±2 V to ±6 V dual supply 2 V to 12 V single supply Automotive temperature range −40°C to +125°C <0.1 nA leakage currents 45 Ω on resistance over full signal range Rail-to-rail switching operation Single 8-to-1 multiplexer ADG658 Differential 4-to-1 multiplexer ADG659 16-lead LFCSP/TSSOP/QSOP packages Typical power consumption <0.1 μW TTL/CMOS compatible inputs Package upgrades to 74HC4051/74HC4052 and MAX4051/MAX4052/MAX4581/MAX4582 APPLICATIONS Automotive applications Automatic test equipment Data acquisition systems Battery-powered systems Communication systems Audio and video signal routing Relay replacement Sample-and-hold systems Industrial control systems FUNCTIONAL BLOCK DIAGRAM ADG658 ADG659 S1 S1A DA S4A D S1B DB S8 S4B 1 OF 8 DECODER 1 OF 4 DECODER A0 A1 A2 EN A0 A1 SWITCHES SHOWN FOR A LOGIC 1 INPUT EN Figure 1. 03273-0-001 GENERAL DESCRIPTION The ADG658 and ADG659 are low voltage, CMOS analog multiplexers comprised of eight single channels and four differential channels, respectively. The ADG658 switches one of eight inputs (S1–S8) to a common output, D, as determined by the 3-bit binary address lines A0, A1, and A2. The ADG659 switches one of four differential inputs to a common differential output, as determined by the 2-bit binary address lines A0 and A1. An EN input on both devices enables or disables the device. When disabled, all channels are switched off. These devices are designed on an enhanced process that provides lower power dissipation yet gives high switching speeds. These devices can operate equally well as either multiplexers or demultiplexers and have an input range that extends to the supplies. All channels exhibit break-before-make switching action, preventing momentary shorting when switching channels. All digital inputs have 0.8 V to 2.4 V logic thresholds, ensuring TTL/CMOS logic compatibility when using single +5 V or dual ±5 V supplies. The ADG658 and ADG659 are available in 16-lead TSSOP/ QSOP packages and 16-lead 4 mm × 4 mm LFCSP packages. PRODUCT HIGHLIGHTS 1. Single- and dual-supply operation. The ADG658 and ADG659 offer high performance and are fully specified and guaranteed with ±5 V, +5 V, and +3 V supply rails. 2. Automotive temperature range −40°C to +125°C. 3. Low power consumption, typically <0.1 μW. 4. 16-lead 4 mm × 4 mm LFCSP packages, 16-lead TSSOP package and 16-lead QSOP package. Rev. D Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2004–2016 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADG658/ADG659 TABLE OF CONTENTS Features .............................................................................................. 1 Applications....................................................................................... 1 Functional Block Diagram .............................................................. 1 General Description ......................................................................... 1 Product Highlights ........................................................................... 1 Revision History ............................................................................... 2 Specifications..................................................................................... 3 Dual Supply ................................................................................... 3 5 V Single Supply.......................................................................... 5 2.7 V to 3.6 V Single Supply........................................................ 7 REVISION HISTORY 11/2016—Rev. C to Rev. D Changes to Figure 3 and Table 7................................................... 11 Updated Outline Dimensions ....................................................... 19 Changes to Ordering Guide .......................................................... 20 9/2014—Rev. B to Rev. C Moved Terminology Section......................................................... 15 Updated Outline Dimensions ....................................................... 19 Changes to Ordering Guide .......................................................... 20 Data Sheet Absolute Maximum Ratings ............................................................9 ESD Caution...................................................................................9 Pin Configurations and F.


AD7175-8 ADG658 ADG659


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)