Document
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85℃
RHBSeries
・Realized higher voltage than RWE series.(575 to 700Vdc) ・Endurance with ripple current : 2,000 hours at 85℃ ・Suitable for X-ray and welder power supply where high energy is required ・RoHS2 Compliant
RHB
Higher voltage RWE
◆SPECIFICATIONS
Items Category Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current
Dissipation Factor (tan ) Low Temperature Characteristics Insulation Resistance
Insulation Withstanding Voltage Endurance
Shelf Life
Characteristics
-25 to +85℃
575 to 700Vdc
±20% (M)
I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
(at 20℃, 120Hz) (at 20℃ after 5 minutes)
0.25 max.
(at 20℃, 120Hz)
Capacitance change C(-25℃)/C(+20℃)≧0.6
(at 120Hz)
When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100MΩ.
When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case, there shall not be electrical damage.
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85℃.
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 500 hours at 85℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change
≦±20% of the initial value
D.F. (tanδ)
≦200% of the initial specified value
Leakage current
≦The initial specified value
F±1
φD+1.8max. 4.5
B±1 K±1 E±1
4.5
◆DIMENSIONS (Screw-Mount) [mm] ●Terminal Code : LG
Sleeve (PVC : Black)
●Mounting Clamp Code : B WA±±11
L+4max. Plastic disk
φ63.5 : G=6 φ76.2 &φ89 : G=5
G±1
Vent
30°±5°
6
φD A B W F 63.5 90.0 76.0 80.0 28.0 76.2 104.5 90.0 93.5 31.5
toφ89 Plus hexagon-headed screw :M5×0.8×10
Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product.
●Mounting Clamp Code : C
360° 3
45°±5°
φD 63.5 76.2 89
8 J
EKF J 38.1 43.5 28.0 14.0 44.5 50.0 31.5 14.0 50.8 56.5 31.5 16.0
◆PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
E RH B AAA LG N AAA M AAA U
Supplement code Size code
Capacitance tolerance code Capacitance code (ex. 1,000µ F:102, 3,300µ F:332)
Mounting clamp code (N, B, C) Terminal code
Voltage code (ex. 575V:5H1, 700V:701) Series code Category
Please refer to "Product code guide (screw-mount terminal type)"
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
CAT. No. E1001T Ver.2
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Inverter-use screw terminal, 85℃
RHBSeries
◆STANDARD RATINGS
WV (Vdc)
575
630
Cap (µF)
1,000 1,200 1,500 1,500 1,800 1,800 2,200 2,200 2,700 2,700 3,300 3,300 3,900 4,700 5,600 1,000 1,200 1,500
Case size D L(mm)
tan
Rated ripple current
(Arms/ 85 ,120Hz)
Part No.
63.5×70 63.5×80 63.5×95 76.2×70 63.5×100 76.2×80 63.5×120 76.2×95 76.2×105
89×85 76.2×120
89×100 89×105 89×130 89×145 63.5×85 63.5×95 63.5×115
0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25
3.80 4.40 5.30 5.20 5.90 6.00 7.10 7.20 8.30 7.00 9.70 8.30 9.10 11.1 12.7 4.10 4.80 5.80
ERHB5H1LGC102MD70U ERHB5H1LGC122MD80U ERHB5H1LGC152MD95U ERHB5H1LGC152ME70U ERHB5H1LGC182MDA0U ERHB5H1LGC182ME80U ERHB5H1LGC222MDC0U ERHB5H1LGC222ME95U ERHB5H1LGC272MEA5U ERHB5H1LGC272MF85U ERHB5H1LGC332MEC0U ERHB5H1LGC332MFA0U ERHB5H1LGC392MFA5U ERHB5H1LGC472MFD0U ERHB5H1LGC562MFE5U ERHB631LGC102MD85U ERHB631LGC122MD95U ERHB631LGC152MDB5U
WV (Vdc) 630
700
Cap (µF)
1,500 1,800 1,800 1,800 2,200 2,200 2,700 2,700 3,300 1,000 1,200 1,500 1,800 1,800 2,200 2,200 2,700 3,300
Case size D L(mm)
tan
Rated ripple current
(Arms/ 85 ,120Hz)
Part No.
76.2×85 63.5×125 76.2×95
89×85 76.2×115
89×90 76.2×130
89×100 89×120 63.5×115 63.5×125 76.2×115 76.2×125 89×105 76.2×155 89×115 89×135 89×155
0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25
5.60 ERHB631LGC152ME85U 6.60 ERHB631LGC182MD.