DatasheetsPDF.com

KTF101B104M31NLT00 Dataheets PDF



Part Number KTF101B104M31NLT00
Manufacturers NIPPON CHEMI-CON
Logo NIPPON CHEMI-CON
Description MULTILAYER CERAMIC CHIP CAPACITORS
Datasheet KTF101B104M31NLT00 DatasheetKTF101B104M31NLT00 Datasheet (PDF)

MULTILAYER CERAMIC CHIP CAPACITORS / RCoomHplSian2t Temperature cycle : 1000 cycles FEATURES 1. Large capacitance by small size. 2. Excellent noise absorption. 3. High permissible ripple current capability. 4. NTF: Temperature cycle : 1000 cycles. APPLICATIONS 1. Smoothing circuit of DC-DC converters. 2. On-board power supplies. 3. Voltage regulators for computers. 3. Noise suppressor for various kinds of equipments. 4. High reliability equipments. CONSTRUCTION Ceramic Dielectric Terminatio.

  KTF101B104M31NLT00   KTF101B104M31NLT00



Document
MULTILAYER CERAMIC CHIP CAPACITORS / RCoomHplSian2t Temperature cycle : 1000 cycles FEATURES 1. Large capacitance by small size. 2. Excellent noise absorption. 3. High permissible ripple current capability. 4. NTF: Temperature cycle : 1000 cycles. APPLICATIONS 1. Smoothing circuit of DC-DC converters. 2. On-board power supplies. 3. Voltage regulators for computers. 3. Noise suppressor for various kinds of equipments. 4. High reliability equipments. CONSTRUCTION Ceramic Dielectric Termination (Tin Plating) RATINGS 1. Category Temperature Range 2. Rated Voltage Range 3. Rated Capacitance Range 4. Rated Capacitance Tolerance 5. Temperature Characteristics 6. Rated Ripple Current Internal Electrode -55 to +125 25, 50, 100, 250, 500Vdc 0.010 to 47 F M ( 20%) : Standard, K ( 10%) X7R See No.5 on the following table SPECIFICATIONS No. Items 1 Withstand Voltage Specification No abnormality. 2 Insulation Resistance 3 Rated Capacitance 4 Dissipation Factor 100/CR(M ) or 4000(M ) whichever is less. Within specified tolerance. 5.0% maximum. Test Condition Rated voltage Less than 250V More than 250V Less than 500V Withstand voltage 250% of rated voltage 100V + 150% of rated voltage More than 500V 130% of rated voltage Shall be applied for 5 seconds. Rated voltage shall be applied for 60 5 seconds at temperature 25 2 . Temperature Frequency Voltage CR 10 F CR>10 F 25 2 1 0.1kHz 120 12Hz 1 0.2Vrms 0.5 0.2Vrms 5 Rated Ripple Current See STANDARD RATINGS 10kHz 1MHz (sine curve) Ripple voltage Vp shall be less than the rated voltage. As customer requirement, Chemi-Con has submits the test results according to AEC-Q200 for Multilayer ceramic capacitors. Please contact us for more information. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 13 CAT. No. E1002W MULTILAYER CERAMIC CHIP CAPACITORS / SPECIFICATIONS No. Items 6 Adhesion Specification No visible damage. 7 Bend strength of the face plating Appearance : No visible damage. C/C : 15% Test Condition Substrate 5N (0.51kgf) for 10 1 seconds Capacitor The substrate shall be bend at a rate of 1mm/s for 5 seconds. Capacitor Press Press bar Substrate 8 Solderability 9 Resistance to Soldering Heat 10 Temperature Cycle 11 Humidity Load Life 12 Endurance Min. 75% of surface of the termination shall be covered with new solder Appearance : No visible damage. C/C : 15% D.F. : To meet the initial specification. I.R. : To meet the initial specification. Appearance : No visible damage. C/C : 15% D.F. : To meet the initial specification. I.R. : To meet the initial specification. Appearance : No abnormality. C/C : 15% D.F. : 10% maximum I.R. : 25/CR(M ) or 1000(M ) whichever is less. Appearance : No abnormality. C/C : 15% D.F. : 10% maximum I.R. : 50/CR(M ) or 1000(M ) whichever is less. Bending .


KTF500B156M55NHT00 KTF101B104M31NLT00 KTF101B154M31NLT00


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)