Document
DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS
NTDSeries RCRoomoHpHlSiaSn2t
◆FEATURES
1. Small in size and wide capacitance range. Max. 470µF is available.
2. Temperature characteristic is X7R in EIA code. 3. Superior humidity characteristic and long life. 4. Excellent high frequency characteristic due to low ESR. 5. High rated ripple current. 6. 250Vdc items are available. 7. Resin(UL94 V-0) used for coating. 8. Pb-free design(also ceramic dielectric)
◆APPLICATIONS
1. Smoothing circuit of switching mode AC-DC or DC-DC converter. 2. Noise suppressor for various kinds of equipments. 3. By-pass or decoupling circuits. 4. Automotive equipments.
◆CONSTRUCTION
Coating Resin
CDeierlaemctircic Termination
Solder (Pb-free)
Internal Electrode
◆RATINGS
1. Category Temperature Range 2. Rated Voltage Range 3. Rated Capacitance Range 4. Rated Capacitance Tolerance 5. Temperature Characteristics 6. Rated Ripple Current
◆SPECIFICATIONS
No. Items
1 Withstand Voltage
Between Terminals
Terminals to Coating Resin
Lead Wire
-55 to +125℃ 25, 35, 50, 100, 250, 500Vdc 0.1 to 470µF M(±20%) X7R See No.5 on the following table
Specification No abnormality.
2 Insulation Resistance 3 Rated Capacitance
4 Dissipation Factor
100/CR(MΩ) or 4000(MΩ) whichever is less. Within specified tolerance.
5.0% maximum.
Test Condition
Rated voltage
Withstand voltage
Less than 250V
250% of rated voltage
MLeosrse tthhaann 520500VV
110500V%+of rated voltage
More than 500V
130% of rated voltage
Shall be applied for 5 seconds.
Rated voltage shall be applied for 60±5 seconds at temperature 25±2℃.
Temperature Frequency Voltage
CR≦10µF
CR>10µF
25±2℃
1±0.1kHz
120±12Hz
1±0.2Vrms
0.5±0.2Vrms
As customer requirement, Chemi-Con has submits the test results according to AEC-Q200 for Multilayer ceramic capacitors. Please contact us for more information.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
25 CAT. No. E1002Y
DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS
NTDSeries
◆SPECIFICATIONS
No. Items 5 Rated Ripple Current 6 Robustness Tension of Terminations Bending
7 Vibration
8 Solderability 9 Resistance to Soldering Heat 10 Temperature Cycle
11 Humidity Load Life
12 Endurance
*CR : Rated Capacitance(µF)
Specification See STANDARD RATINGS
No visible damage.
Appearance : No abnormality. Capacitance : To meet the initial
specification. D.F. : To meet the initial specification. Min. 75% of surface of the termination shall be covered with new solder.
Appearance : No abnormality. ΔC/C :±15% D.F. : To meet the initial specification. I.R. : To meet the initial specification.
Appearance : No abnormality. ΔC/C :±15% D.F. : To meet the initial specification. I.R. : To meet the initial specification.
Appearance : No abnormality. ΔC/C :±20% D.F. : 10% maximum I.R. : 25/CR(MΩ) or 1000(MΩ)
whichever is less. Appearance : No abnormality. ΔC/C :±20% D.F. : 10% maximum I.R. : 50/CR(MΩ) or 1000(MΩ)
whichever is less.
Test Condition
10kHz to 1MHz (sine curve) Ripple voltage Vp shall be less than the rated voltage.
The force applied shall be :
Lead φ (mm) 0.5 max. 0.6 min.
Tensile(N) 5 10
(sec.)
10±1 10±1
Lead φ (mm) 0.5 max. 0.6 min.
Time : 2times.
Bending(N)
2.5 5
(kg)
0.25 0.51
Amplitude
: 1.5mm
Frequency range : 10-55-10Hz (1 min)
Direction and time :
2 hours each to X, Y, Z axis. Total 6 hours.
Solder Solder Temperature
Dipping Time
Pb Free 245±5℃ 2±0.5sec.
Solder Temperature : 350±10℃
Dipping Time
: 3±0.5 sec.
Depth
: 1.5 to 2mm
Step
Temperature (℃)
1 Min. Category temperature ±3
2 Room temperature 3 Max. Category temperature ±3
4 Room temperature
For 5 cycles for above temperature cycle.
Temperature : 40±2℃
Humidity : 90 to 95%RH
Voltage
: Rated voltage
Time
:
500±
24 0
hours
(min.) 30±3
3 max. 30±3
3 max.
Temperature : 125±3℃
Voltage Time
: Rated voltage : 1000± 408 hours
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
26 CAT. No. E1002Y
DIPPED RADIAL LEAD MULTILAYER CERAMIC CAPACITORS
NTDSeries
◆STANDARD RATINGS
Rated voltage Rated Capacitance
(Vdc)
(µF)
3.3
4.7
6.8
10
15
15
22
25 33
47
68
100
150
220
330
470
3.3
4.7
6.8
35
10 15
22
33
47
1.0
1.5
2.2
3.3
4.7
6.8
10
50 15
22
33
47
68
100
150
220
0.33
0.47
0.68
1.0
1.5
2.2
1.5
2.2
3.3
4.7
100 3.3
4.7
6.8
6.8
10
15
22
33
47
68
100
Lmax. 5.0 6.5
7.5 10.0 13.5 22.5 28.5
5.0 6.5 7.5 10.0
5.0
6.5 7.5 10.0 13.5 22.5 28.5
5.0
6.5
7.5 10.0 13.5 22.5 28.5
Dimensions (mm)
Wmax.
Tmax.
F±0.8
6.0 3.5 5.0
6.5 4.0 5.0
9.0 4.5 5.0.