Metal Glaze-Metal Oxide Resistors
MOX500 Series
Epoxy Molded, Metal Glaze-Metal Oxide Resistors
F e at u r e s
• Meets Mil-Std-202 • Meets IEC 61000-4-5 u...
Description
MOX500 Series
Epoxy Molded, Metal Glaze-Metal Oxide Resistors
F e at u r e s
Meets Mil-Std-202 Meets IEC 61000-4-5 up to 2KV Molded Construction Available in E96 values
C h a r a c t e r i s t i cs
Resistor Type Thick Film, Epoxy Molded
Power Rating 2W at 70°C 3W at 25°C
Resistance Range Metal Glaze:1.5KΩ to 5MΩ Metal Oxide:15Ω to <1.5KΩ
Tolerance 1%, 2%, 5%
Temp. Coeff. Resistance
Metal Glaze: 100/200ppm Metal Oxide: 350ppm
Not all tolerances and TCR values available throughout entire resistance range
Construction Metal glaze 100/200 ppm Metal oxide 350 ppm
Max. Working Voltage
RCWV or 1000 V whichever lesser. (RCWV = rated DC or RMS AC continuos working voltage at commercial line frequency and waveform (volt) )
Diel. Width- 1000 VRMS standing Volt.
Terminals Copper Wire, Solder Coated axial, RoHS composition
Oper. Temp. -55º to +155ºC
Characteristic Test Method
Moisture MIL-STD-202, Method 106G Resistance
Humidity MIL-STD-202, Method 103, Condition B
Shock MIL-STD-202, Method 213, Condition I
Vibration MIL-STD-202, Method 204, Condition D
Terminal MIL-STD-202, Method 211A, Condition Strength A or B
Short Term DC test potential 2.5 time the rated conOverload tinuous working voltage but not exceeding twice the maximum voltage specified
Load Life 1000 hrs at RCWV duty cycle 1.5hr ON, 0.5 hr OFF at 70ºC ±2ºC
Temperature -65º to +125ºC Cycling
Resistance to Temp 350ºC ±10ºC for 3 ±0.5 sec soldering heat
Surge IEC61000-4-5, waveform 1.2/50μS, 10 Immunity ...
Similar Datasheet