STSPIN32F0
Advanced BLDC controller with embedded STM32 MCU
Features
Extended operating voltage from 8 to 45 V
Thr...
STSPIN32F0
Advanced BLDC controller with embedded STM32 MCU
Features
Extended operating voltage from 8 to 45 V
Three-phase gate drivers – 600 mA sink/source – Integrated bootstrap diodes – Cross-conduction prevention
32-bit ARM® Cortex®-M0 core: – Up to 48 MHz clock frequency – 4-kByte SRAM with HW parity – 32-kByte Flash memory with option bytes used for write/readout protection
3.3. V DC/DC buck converter
regulator with overcurrent, short-circuit, and thermal protection
12 V LDO linear
regulator with thermal protection
16 general-purpose I/O ports (GPIO)
5 general-purpose timers
12-bit ADC converter (up to 9 channels) I2C, USART and SPI interfaces
4 rail-to-rail operation amplifiers for signal conditioning
Comparator for overcurrent protection with programmable threshold
3FG open-drain output providing the decoded result of 3 Hall sensors inputs
Standby mode for low power consumption
Datasheet - production data
UVLO protection on each power supply: – VM, VDD, VREG and VBOOTx
On-chip debug support via SWD Extended temperature range: -40 to +125 °C
Applications
Kitchen robots Portable vacuum cleaners Hand dryers and air purifiers Drones and aero. modeling Power tools Industrial and educational robots Home appliance and air-con. fans
March 2017
This is information on a product in full production.
DocID029806 Rev 2
1/40
www.st.com
Contents
Contents
STSPIN32F0
1 Description . . . . . . . . . . . . . . . . . . . . . . . . . ....