LCD
OUTLINE DRAWING
Full Graphics Type LCD Module
LM160160A Series
FEATURES
160 x 160 dots, parallel interface Single...
Description
OUTLINE DRAWING
Full Graphics Type LCD Module
LM160160A Series
FEATURES
160 x 160 dots, parallel interface Single 3.3v power supply Ultra high contrast, FSTN-Positive with White
LED backlight Contrast ratio adjustable by software Popular in Intelligent Power Meter
TERMINAL FUNCTIONS
Pin Name Descriptions
1 VSS Negative power supply, 0V
Register Select
2 D/C D/C=H, Transferring the Display Data
D/C=L, Transferring the Control Data
/WR=L->H, /RD=H 3 /WR
Data or Instruction latch into the LCD module
4
/RD
/WR=L->H, /RD=H Data or Status read from the LCD module
Chip Select
5 /CS0 CS0=L, enable access to the LCD module
CS0=H, disable access to the LCD module
Reset signal
6 /RST /RST=L, Initialization is executed
/RST=H, Normal running
7 /VDD Positive power supply
8 DB0 8 bit Data bus;
9:
Three state I/O terminal for display data
15 DB7
or instruction data when /CS=H, D0~D7=High Impedance
16 BLK Negative power for LED backlight
17 NC No connection, leave open
18 BLA Positive power for LED backlight
MECHANICAL DATA
Item
Value
Outline (mm) Viewing Area (mm)
83.8 x 76.5 x 9.6MAX. 60.0 x 60.0
Active Area (mm)
54.4 x 54.4
Dot Pitch (mm)
0.34 x 0.34
Dot Size (mm)
0.32 x 0.32
DISPLAY CHARACTERISTICS
Item
Value
LCD Display Mode Viewing Angle
FSTN, Positive, Transflective 6:00
Driving Method
1/160 duty, 1/10 bias
Backlight
White LED backlight
ELECTRICAL CHARACTERISTICS
Item
Symbol Min Typ Max
Operating Voltage (V)
VDD
2.7 3.0
...
Similar Datasheet