CC1352P MCU Datasheet

CC1352P Datasheet, PDF, Equivalent


Part Number

CC1352P

Description

High-Performance Dual-Band Wireless MCU

Manufacture

etcTI

Total Page 30 Pages
Datasheet
Download CC1352P Datasheet


CC1352P
Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
CC1352P
SWRS192C – JULY 2018 – REVISED JULY 2019
CC1352P SimpleLink™ High-Performance Dual-Band Wireless MCU
With Integrated Power Amplifier
1 Device Overview
1.1 Features
1
• Microcontroller
– Powerful 48-MHz Arm® Cortex®-M4F Processor
– EEMBC CoreMark® score: 148
– 352KB of in-system Programmable Flash
– 256KB of ROM for protocols and library
functions
– 8KB of Cache SRAM (Alternatively available as
general-purpose RAM)
– 80KB of ultra-low leakage SRAM. The SRAM is
protected by parity to ensure high reliability of
operation.
– 2-Pin cJTAG and JTAG debugging
– Supports Over-the-Air upgrade (OTA)
• Ultra-Low Power Sensor Controller with 4KB of
SRAM
– Sample, store, and process sensor data
– Operation independent from system CPU
– Fast wake-up for low-power operation
• TI-RTOS, drivers, Bootloader, Bluetooth® 5 Low
Energy Controller, and IEEE 802.15.4 MAC in
ROM for optimized application size
• RoHS-compliant package
– 7-mm × 7-mm RGZ VQFN48 (26 GPIOs)
• Peripherals
– Digital peripherals can be routed to any GPIO
– 4× 32-bit or 8× 16-bit general-purpose timers
– 12-Bit ADC, 200 kSamples/s, 8 channels
– 2× comparators with internal reference DAC
(1× continuous time, 1× ultra-low power)
– Programmable current source
– 2× UART
– 2× SSI (SPI, MICROWIRE, TI)
– I2C
– I2S
– Real-Time Clock (RTC)
– AES 128- and 256-bit Crypto Accelerator
– ECC and RSA Public Key Hardware Accelerator
– SHA2 Accelerator (Full suite up to SHA-512)
– True Random Number Generator (TRNG)
– Capacitive sensing, up to 8 channels
– Integrated temperature and battery monitor
• External system
– On-chip Buck DC/DC Converter
• Low Power
– Wide supply voltage range: 1.8 V to 3.8 V
– Active-mode RX: 5.8 mA (3.6 V, 868 MHz),
6.9 mA (3.0 V, 2.4 GHz)
– Active-Mode TX at +20 dBm: 63 mA (3.3 V,
915 MHz), 85 mA (3.0 V, 2.4 GHz)
– Active-Mode MCU 48 MHz (CoreMark):
2.9 mA (60 μA/MHz)
– Sensor Controller, Low Power-Mode, 2 MHz,
running infinite loop: 30.8 μA
– Sensor Controller, Active-Mode, 24 MHz,
running infinite loop: 808 μA
– Standby: 0.85 µA (RTC on, 80KB RAM and
CPU retention)
– Shutdown: 150 nA (wakeup on external events)
• Radio section
– Dual-band sub-1 GHz and 2.4-GHz RF
transceiver compatible with Bluetooth 5 Low
Energy and IEEE 802.15.4 PHY and MAC
– Excellent receiver sensitivity:
–121 dBm for SimpleLink long-range mode
–110 dBm at 50 kbps, –105 dBm for Bluetooth
125-kbps (LE Coded PHY)
– Output power up to +20 dBm with temperature
compensation
– Suitable for systems targeting compliance with
worldwide radio frequency regulations
– ETSI EN 300 220 Receiver Category 1.5 and
2, EN 300 328, EN 303 131, EN 303 204
(Europe)
– EN 300 440 Category 2
– FCC CFR47 Part 15
– ARIB STD-T108 and STD-T66
– Wide standard support
• Development Tools and Software
LAUNCHXL-CC1352P1 and LAUNCHXL-
CC1352P-2 Development Kits
SimpleLink™ CC13X2-CC26X2 Software
Development Kit
SmartRF™ Studio for simple radio configuration
Sensor Controller Studio for building low-power
sensing applications
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.

CC1352P
CC1352P
SWRS192C – JULY 2018 – REVISED JULY 2019
www.ti.com
1.2 Applications
• 433-, 470- to 510-, 868-, 902- to 928-, and
2400 to 2480 MHz ISM and SRD systems (1)
with down to 4 kHz of receive bandwidth
• Home and building automation
– Building security systems – motion detector,
electronic door lock, door and window sensor,
gateway
– HVAC – thermostat, wireless environmental
sensor, HVAC system controller
– Fire safety systems – smoke detector, fire
alarm control panel
– Video surveillance – IP camera
– Garage door openers
– Elevator and escalator control
(1) See RF Core for additional details on supported protocol
standards, modulation formats, and data rates.
• Smart grid and automatic meter reading
– Water, gas, and electricity meters
– Heat cost allocators
– Gateways
• Wireless sensor networks
– Long-range sensor applications
• Asset tracking and management
• Factory automation
• Wireless healthcare applications
• Energy harvesting applications
• Electronic Shelf Label (ESL)
1.3 Description
The CC1352P device is a multiprotocol Sub-1 and 2.4-GHz wireless MCU targeting Wireless M-Bus, IEEE
802.15.4g, IPv6-enabled smart objects (6LoWPAN), Thread, Zigbee®, KNX RF, Wi-SUN®, Bluetooth® 5
Low Energy, and proprietary systems, including the TI 15.4-Stack. The device contains a +20 dBm
integrated high-power amplifier with best-in-class efficiency for long-range applications.
The CC1352P device is a member of the SimpleLink™ MCU platform of cost-effective, ultra-low power,
2.4-GHz and Sub-1 GHz RF devices. Very low active RF and microcontroller (MCU) currents, in addition
to sub-μA sleep current with up to 80KB of parity protected RAM retention, provide excellent battery
lifetime and allow operation on small coin-cell batteries and in energy-harvesting applications.
The CC1352P device combines a flexible, very low-power RF transceiver with a powerful 48-MHz Arm®
Cortex®-M4F CPU in a platform supporting multiple physical layers and RF standards. A dedicated Radio
Controller (Arm® Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM,
thus ensuring ultra-low power and great flexibility. The low power consumption of the CC1352P device
does not come at the expense of RF performance; the CC1352P device has excellent sensitivity and
robustness (selectivity and blocking) performance.
The flexible radio in the CC1352P enables concurrent time-multiplexed multi-protocol and multi-band
operation through the Dynamic Multi-Protocol Manager (DMM) driver.
The CC1352P device is a highly integrated, true single-chip solution incorporating a complete RF system
and an on-chip DC/DC converter.
Sensors can be handled in a very low-power manner by a programmable, autonomous ultra-low power
Sensor Controller CPU with 4KB of SRAM for program and data. The Sensor Controller, with its fast
wake-up and ultra-low-power 2 MHz mode is designed for sampling, buffering, and processing both
analog and digital sensor data; thus the MCU system can maximize sleep time and reduce active power.
The CC1352P device is part of the SimpleLink™ microcontroller (MCU) platform, which consists of
Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs, which all share a
common, easy-to-use development environment with a single core software development kit (SDK) and
rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the
portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements
change. For more information, visit ti.com/simplelink.
2 Device Overview
Submit Documentation Feedback
Product Folder Links: CC1352P
Copyright © 2018–2019, Texas Instruments Incorporated


Features Product Folder Order Now Technical Doc uments Tools & Software Support & Com munity CC1352P SWRS192C – JULY 2018 – REVISED JULY 2019 CC1352P SimpleLin k™ High-Performance Dual-Band Wireles s MCU With Integrated Power Amplifier 1 Device Overview 1.1 Features 1 • M icrocontroller – Powerful 48-MHz Arm Cortex®-M4F Processor – EEMBC Core Mark® score: 148 – 352KB of in-syste m Programmable Flash – 256KB of ROM f or protocols and library functions – 8KB of Cache SRAM (Alternatively availa ble as general-purpose RAM) – 80KB of ultra-low leakage SRAM. The SRAM is pr otected by parity to ensure high reliab ility of operation. – 2-Pin cJTAG and JTAG debugging – Supports Over-the-A ir upgrade (OTA) • Ultra-Low Power Se nsor Controller with 4KB of SRAM – Sa mple, store, and process sensor data Operation independent from system CPU – Fast wake-up for low-power operati on • TI-RTOS, drivers, Bootloader, Bl uetooth® 5 Low Energy Controller, and IEEE 802.15.4 MAC in ROM for optimized application size • RoHS.
Keywords CC1352P, datasheet, pdf, etcTI, High-Performance, Dual-Band, Wireless, MCU, C1352P, 1352P, 352P, CC1352, CC135, CC13, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)