MSP430FR2475

Product Folder Order Now Technical Documents Tools & Software Support & Community MSP430FR2476, MSP430FR2475 SLASEO7A – MARCH 2019 – REVISED APRIL 2019 MSP430FR247x Mixed-Signal Microcontrollers 1 Device Overview 1.1 Features 1 Embedded microcontroller – 16-bit RISC architecture – Clock supports frequencies up to 16 MHz – Wide supply voltage range from 3.6 V down to 1.8 V (minimum supply voltage is restricted by SVS levels, see the SVS Specifications) Optimized ultra-low-power modes – Active mode: 135 µA/MHz (Typical) – Standby: LPM3.5, real-time clock (RTC) counter with 32768-Hz crystal: 660 nA (typical) – Shutdown (LPM4.5): 37 nA without SVS Low-power ferroelectric RAM (FRAM) – Up to 64KB of nonvolatile memory – Built-in error correction code (ECC) – Configurable write protection – Unified memory of program, constants, and storage – 1015 write cycle endurance – Radiation resistant and nonmagnetic Intelligent digital peripherals – Four 16-bit timers with three capture/compare registers each (Timer_A3) – One 16-bit timer with seven capture/compare registers (Timer_B7) – One 16-bit counter-only RTC – 16-bit cyclic redundancy check (CRC) Enhanced serial communications with support for pin remap feature – Two eUSCI_A supports UART, IrDA, and SPI – Two eUSCI_B supports SPI and I2C High-performance analog – One 12-bit analog-to-digital converter (ADC) with up to 12 channels – Internal shared reference (1.5 V, 2.0 V, or 2.5 V) – Sample-and-hold 200 ksps – One en...