Non-volatile Digital Programmable Capacitor
INTEGRATED CIRCUITS DIVISION
Features
• DC to 150MHz frequency range • 512-state digital programmable capacitor • Series...
Description
INTEGRATED CIRCUITS DIVISION
Features
DC to 150MHz frequency range 512-state digital programmable capacitor Series or shunt configuration
Cshunt = 12.5pF to 194pF (15.5:1 tuning ratio) in discrete 355fF steps Cseries = 1.7pF to 194pF in discrete 376fF steps 2-wire (I2C Fast-mode compatible) serial interface EEPROM non-volatile memory Wide power supply range (2.5V to 5.5V) Operation ambient temperature to 105ºC 2 x 2 x 0.65 mm 6-pin DFN package
Applications
OCXOs Oscillators Tunable RF stages Filter tuning Capacitive sensor trimming Measurement equipment
NCD2400M
Wide Capacitance Range, Non-volatile Digital Programmable Capacitor
Description
The NCD2400M is a dedicated electronic calibrator for oscillators, with reliable performance at 105ºC as required by OCXO applications.
This product can be used in series or shunt configuration to support a wide variety of tuning circuit topologies.
Digitally controlled capacitance trimming information is communicated via a 2-wire, I2C Fast-mode compatible interface. The preferred power-up default capacitance value can be stored in the internal, re-programmable, non-volatile memory.
Ordering Information
Part #
Description
NCD2400MTR NCD2400M1TR
Standard product, Chip ID = 0x60, DFN-6 in Tape & Reel (3000/Reel)
Special order, Contact Factory for details, Chip ID = 0x61, DFN-6 in Tape & Reel (3000/Reel)
Figure 1. NCD2400M Block Diagram V+
VDD
V+
NCD2400M
SDA SCL
DIGITAL INTERFACE V+ AND
MEMORY
CP C0
...
Similar Datasheet