uClamp5011ZA

PROTECTION PRODUCTS - µClamp® Description µClamp® TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 0201 size multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics. It features large cross-sectional area junctions for conducting high transient currents. This device offers desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. µClamp®5011ZA features extremely good ESD protection characteristics highlighted by low typical dynamic resistance of 0.15 Ohms, low peak ESD clamping voltage, and high ESD withstand voltage (+/-15kV contact per IEC 61000-4-2). Low maximum capacitance (5pF at VR=0V) minimizes loading on sensitive cirucuits. Each device will protect one data or power line operating at 5 Volts. µClamp5011ZA is in a 2-pin SLP0603P2X3F package. It measures 0.6 x 0.3 mm with a nominal height of only 0.25mm. Leads are finished with NiAu. The small package gives the designer the flexibility to protect single lines in applications where arrays are not practical. The combination of small size and high ESD surge capability makes them ideal for use in portable applications such as cellular phones, digital cameras, and tablet PC’s. µClamp5011ZA Ultra Small µClamp® 1-Line, 5V ESD Protection Features u High ESD withstand Voltage: +/-15kV (Contact) and +/- ...