LM9076Q

LM9076Q www.ti.com SNVS713B – APRIL 2011 – REVISED MARCH 2013 LM9076Q 150mA Ultra-Low Quiescent Current LDO Regulator with Delayed Reset Output Check for Samples: LM9076Q FEATURES 1 2 AEC-Q100 Grade1 Qualified (-40°C to +125°C) Available with 5.0V or 3.3V Output Voltage Ultra Low Ground Pin Current, 25 μA Typical for 100 μA Load VOUT Initial Accuracy of ±1.5% VOUT Accurate to ±3% Over Load and Temperature Conditions Low Dropout Voltage, 200 mV Typical with 150 mA Load Low Off State Ground Pin Current for LM9076QBMA Delayed RESET Output Pin for Low VOUT Detection +70V/-50V Voltage Transients Operational VIN up to +40V DESCRIPTION The LM9076Q is a ±3%, 150 mA logic controlled voltage regulator. The regulator features an active low delayed reset output flag which can be used to reset a microprocessor system at turn-ON and in the event that the regulator output voltage falls below a minimum value. An external capacitor programs a delay time interval before the reset output pin can return high. Designed for automotive and industrial applications, the LM9076Q contains a variety of protection features such as thermal shutdown, input transient protection and a wide operating temperature range. The LM9076Q uses an PNP pass transistor which allows low drop-out voltage operation. 1 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers there...