POWER-DISTRIBUTION SWITCHES
www.ti.com
TPS2010A, TPS2011A TPS2012A, TPS2013A
SLVS189C – DECEMBER 1998 – REVISED SEPTEMBER 2007
POWER-DISTRIBUTION S...
Description
www.ti.com
TPS2010A, TPS2011A TPS2012A, TPS2013A
SLVS189C – DECEMBER 1998 – REVISED SEPTEMBER 2007
POWER-DISTRIBUTION SWITCHES
FEATURES
1
33-mΩ (5-V Input) High-Side MOSFET Switch Short-Circuit and Thermal Protection Operating Range . . . 2.7 V to 5.5 V Logic-Level Enable Input Typical Rise Time. . . 6.1 ms Undervoltage Lockout Maximum Standby Supply Current. . . 10 μA No Drain-Source Back-Gate Diode Available in 8-pin SOIC and 14-Pin TSSOP
Packages
Ambient Temperature Range, –40°C to 85°C 2-kV Human-Body-Model, 200-V
Machine-Model ESD Protection
DESCRIPTION
The TPS201xA family of power distribution switches is intended for applications where heavy capacitive loads and short circuits are likely to be encountered. These devices are 50-mΩ N-channel MOSFET high-side power switches. The switch is controlled by a logic enable compatible with 5-V logic and 3-V logic. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7 V.
When the output load exceeds the current-limit threshold or a short is present, the TPS201xA limits the output current to a safe level by switching into a constant-current mode. When continuous heavy overloads and short circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circu...
Similar Datasheet