DatasheetsPDF.com

SAMC20J Dataheets PDF



Part Number SAMC20J
Manufacturers Atmel
Logo Atmel
Description SMART ARM-Based Microcontrollers
Datasheet SAMC20J DatasheetSAMC20J Datasheet (PDF)

SMART ARM-Based Microcontrollers SAM C20E / SAM C20G / SAM C20J DATASHEET SUMMARY Introduction The Atmel® | SMART™ SAM C20 is a series of microcontrollers optimized for industrial automation, appliances and other 5V applications using the 32-bit ARM® Cortex®-M0+ processor, ranging from 32- to 64-pins with up to 256KB Flash and 32KB of SRAM and operate at a maximum frequency of 48MHz and reach 2.46 CoreMark®/MHz. The SAM C20 devices are designed for simple and intuitive migration with identical p.

  SAMC20J   SAMC20J


Document
SMART ARM-Based Microcontrollers SAM C20E / SAM C20G / SAM C20J DATASHEET SUMMARY Introduction The Atmel® | SMART™ SAM C20 is a series of microcontrollers optimized for industrial automation, appliances and other 5V applications using the 32-bit ARM® Cortex®-M0+ processor, ranging from 32- to 64-pins with up to 256KB Flash and 32KB of SRAM and operate at a maximum frequency of 48MHz and reach 2.46 CoreMark®/MHz. The SAM C20 devices are designed for simple and intuitive migration with identical peripheral modules, hex compatible code, identical linear address map and pin compatible migration paths between all devices in the product series. All devices include intelligent and flexible peripherals, Atmel Event System for inter-peripheral signaling, and support for capacitive touch button, slider and wheel user interfaces. SAM C20 devices are pin compatible to the SAM D and SAM C family of general purpose microcontrollers. Features • Processor – ARM Cortex-M0+ CPU running at up to 48MHz • Single-cycle hardware multiplier • Micro Trace Buffer • Memory Protection Unit (MPU) • Memories – 32/64/128/256KB in-system self-programmable Flash – 1/2/4/8KB independent self-programmable Flash for EEPROM emulation – 4/8/16/32KB SRAM Main Memory • System – Power-on reset (POR) and brown-out detection (BOD) – Internal and external clock options with 48MHz to 96MHz Fractional Digital Phase Locked Loop (FDPLL96M) – External Interrupt Controller (EIC) – 16 external interrupts – One non-maskable interrupt Atmel-42364J-SAM-C20_Datasheet_Summary-11/2016 – Two-pin Serial Wire Debug (SWD) programming, test and debugging interface • Low Power – Idle, standby, and off sleep modes – SleepWalking peripherals • Peripherals – Hardware Divide and Square Root Accelerator (DIVAS) – 6-channel Direct Memory Access Controller (DMAC) – 6-channel Event System – Up to five 16-bit Timer/Counters (TC), configurable as either: • One 16-bit TC with compare/capture channels • One 8-bit TC with compare/capture channels • One 32-bit TC with compare/capture channels, by using two TCs – One 24-bit Timer/Counter for Control (TCC), with extended functions: • Up to four compare channels with optional complementary output • Generation of synchronized pulse width modulation (PWM) pattern across port pins • Deterministic fault protection, fast decay and configurable dead-time between complementary output • Dithering that increase resolution with up to 5 bit and reduce quantization error – Frequency Meter – 32-bit Real Time Counter (RTC) with clock/calendar function – Watchdog Timer (WDT) – CRC-32 generator – Up to four Serial Communication Interfaces (SERCOM), each configurable to operate as either: • USART with full-duplex and single-wire half-duplex configuration • I2C up to 3.4MHz • SPI • LIN master/slave • RS-485 – One Configurable Custom Logic (CCL) – One 12-bit, 1Msps Analog-to-Digital Converter (ADC) with up to 12 channels • Differential and single-ended input • Automatic offset and gain error compensation • Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution – Two Analog Comparators (AC) with window compare function – Peripheral Touch Controller (PTC) • 256-Channel capacitive touch and proximity sensing • I/O – Up to 52 programmable I/O pins • Drop in compatible with SAM D20 and SAM D21 • Packages – 64-pin TQFP, QFN – 56-pin WLCSP – 48-pin TQFP, QFN Atmel SAM C20E / SAM C20G / SAM C20J [DATASHEET] Atmel-42364J-SAM-C20_Datasheet_Summary-11/2016 2 – 32-pin TQFP, QFN • Operating Voltage – 2.7V – 5.5V Atmel SAM C20E / SAM C20G / SAM C20J [DATASHEET] Atmel-42364J-SAM-C20_Datasheet_Summary-11/2016 3 Table of Contents Introduction......................................................................................................................1 Features.......................................................................................................................... 1 1. Description.................................................................................................................5 2. Configuration Summary............................................................................................. 6 3. Ordering Information..................................................................................................8 3.1. SAM C20E....................................................................................................................................8 3.2. SAM C20G................................................................................................................................... 9 3.3. SAM C20J.................................................................................................................................. 10 3.4. Device Identification..................................................................................................


SAMC20G SAMC20J APG0603CGC-TT


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)