LM2633
www.ti.com
SNVS139C – MAY 2004 – REVISED APRIL 2005
LM2633 Advanced Two-Phase Synchronous Triple Regulator Con...
LM2633
www.ti.com
SNVS139C – MAY 2004 – REVISED APRIL 2005
LM2633 Advanced Two-Phase Synchronous Triple
Regulator Controller for Notebook CPUs
Check for Samples: LM2633
FEATURES
1
23GENERAL
Three regulated output voltages 4.5V to 30V input range Power good function Input under-voltage lockout Thermal shutdown Tiny TSSOP package
SWITCHING SECTION Two channels operating 180° out of phase Separate on/off control for each channel Current mode control without sense resistor Skip-mode operation available Adjustable cycle-by-cycle current limit Negative current limit Analog soft start independent of input voltage
slew rate Power ground pins separate Output UVP and OVP
Programmable output UVP delay 250kHz switching frequency (for Vin < 17V) Channel 1 output from 0.925V to 2.00V ±1.5% DAC accuracy from 0°C to 125°C ±1.7% initial tolerance for Channel 2 Dynamic VID change ready Power good flags VID changes Channel 2 output from 1.3V to 6.0V
LINEAR SECTION Output voltage adjustable 50mA maximum driving current Output UVP ±2% initial tolerance
APPLICATIONS
Power supply for CPUs of notebook PCs that require the SpeedStep™ technique
Power supply for information appliances General low voltage DC/DC buck
regulators
DESCRIPTION
The LM2633 is a feature-rich IC that combines three
regulator controllers - two current mode synchronous buck
regulator controllers and a linear
regulator controller.
The two switching
regulator controll...