1A White LED Driver
LM3551, LM3552
www.ti.com
SNVS371D – AUGUST 2005 – REVISED MAY 2013
LM3551 /LM3552 1A White LED Driver with Flash Tim...
Description
LM3551, LM3552
www.ti.com
SNVS371D – AUGUST 2005 – REVISED MAY 2013
LM3551 /LM3552 1A White LED Driver with Flash Timeout Protection
Check for Samples: LM3551, LM3552
FEATURES
1
2 Up to 1A Total Drive Current Flash Timeout Protection Independent Torch/Flash/Shutdown Modes LED Disconnect in Shutdown Programmable Soft-Start Limits Inrush Current Over-Voltage Protection Wide Voltage Range 2.7 to 5.5V 1.25MHz Constant Switching Frequency Small, Low Profile Package, Non-Pullback
WSON(4mm x 4mm)
APPLICATIONS
White LED Camera Flash White LED Torch (Flashlight) DSC (Digital Still Camera) Flash Cellular Camera Phone Flash PDA Camera Flash Camcorder Torch (Flashlight) Lamp
DESCRIPTION
The LM3551 and LM3552 are fixed frequency, current mode step-up DC/DC converters with two integrated NFETs that can be used for precision LED brightness control. The devices are capable of driving loads up to 1A from a single-cell Li-Ion battery.
The LM3551 and LM3552 can drive one or more high current flash LEDs either in a high power Flash mode or a lower power Torch mode using the TORCH/FLASH pin. A programmable Timeout function on the FTO pin forces the internal NFETs to turn off after a certain user defined time. An external SD pin (LM3551) or EN pin (LM3552) is available to put the device into low power shutdown mode. During shutdown, the feedback resistors and the load are disconnected from the input to avoid leakage current paths to ground.
User programmable soft-...
Similar Datasheet