Power-over-Ethernet PSE Protection
TVS Diode Array (SPA®Diodes)
Lightning Surge Protection - SP1050 Series
SP1050 Series for Power-over-Ethernet PSE Protec...
Description
TVS Diode Array (SPA®Diodes)
Lightning Surge Protection - SP1050 Series
SP1050 Series for Power-over-Ethernet PSE Protection
RoHS Pb GREEN
Functional Block Diagram
GND 2-3-6-7
PS1 1
PS2 4
PS3 5
PS4 8
Absolute Maximum Ratings
Parameter Peak Pulse Current (8/20µs)
Rating 24
Units A
Peak Pulse Power (8/20µs)
2700
W
IEC 61000-4-2, Contact Discharge, (Level 4)
30
kV
IEC 61000-4-2, Air Discharge, (Level 4)
30 kV
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied.
Additional Information
Datasheet
Resources
Samples
Description
The SP1050-04BTG provides over-voltage protection for Power-over-Ethernet PSE equipment in a space saving SOIC-8 package. It incorporates four TVS Diodes each with their own decoupling capacitor to stabilize power supplies.
The SP1050 Series is compatible with the older IEEE 803. af and IEEE 802.3at PoE requirements for Mode A or Mode B for both PSE and PD but is not compatible with the new IEEE 802.3bt ( 4 wire-pair simultaneous powering) PSE/PD Class 5 through Class 8 or other 4 wire-pair simultaneous powering schemes that implement independent sources for each two wire-pair interface.
It will protect two wire-pair interfaces that share a common grounding from lightning induced surges as outlined i...
Similar Datasheet