MP5030 Controller Datasheet

MP5030 Datasheet, PDF, Equivalent


Part Number

MP5030

Description

USB Charging Port Controller

Manufacture

MPS

Total Page 17 Pages
Datasheet
Download MP5030 Datasheet


MP5030
The Future of Analog IC Technology
MP5030
USB Charging Port Controller with
Current Limit Switch,
Supporting Type-C 5V and QC 3.0 Modes
DESCRIPTION
The MP5030 integrates a USB current-limit
switch and charging port identification circuit.
The MP5030 achieves 3A of continuous output
current over a wide input supply range.
The output of the USB switch is current-limit
programmable. The MP5030 supports DCP
schemes for battery charging specification
(BC1.2), divider mode, 1.2V/1.2V mode, and
quick charge specification (QC 3.0) without the
need for external user interaction. The MP5030
also supports Type-C 5V @ 3A DFP mode.
The MP5030 provides linear line drop
compensation.
Full protection features include hiccup current
limiting, input over-voltage protection (OVP), and
thermal shutdown.
The MP5030 requires a minimal number of
readily available, standard, external components
to complete the USB switch and charging mode
auto-detection solution. The MP5030 is available
in a QFN-10 (1.5mmx2mm) package.
FEATURES
Wide 3.6V to 14V Operating Input Voltage
Range
Supports QC 3.0 (3.6V - 12VOUT) and DCP
Schemes for BC 1.2, Divider Mode,
1.2V/1.2V Mode
Supports Type-C 5V @ 3A DFP Mode
Line Drop Compensation for 5V Output
Programmable High-Accuracy Current Limit
32mLow RDS(ON) Power MOSFET
Input Discharge during High Voltage to Low
Voltage Change
Input Over-Voltage Shutdown Protection
±8kV HBM ESD Rating for USB DP/DM
pins
Compatible with Buck, Boost, and AC/DC
Converters
Available in a QFN-10 (1.5mmx2mm)
Package
APPLICATIONS
USB Power Supplies
AC/DC Wall Adapters with USB Ports
Automotive Cigarette Lighter Adapters
Power Banks
All MPS parts are lead-free, halogen-free, and adhere to the RoHS directive.
For MPS green status, please visit the MPS website under Quality
Assurance. “MPS” and “The Future of Analog IC Technology” are registered
trademarks of Monolithic Power Systems, Inc.
TYPICAL APPLICATION
MP5030 Rev. 1.01
www.MonolithicPower.com
9/27/2018
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2018 MPS. All Rights Reserved.
1

MP5030
MP5030 – USB CHARGING PORT CONTROLLER SUPPORTING TYPE-C 5V AND QC 3.0
ORDERING INFORMATION
Part Number*
MP5030GQH
Package
QFN-10 (1.5mmx2mm)
Top Marking
See Below
* For Tape & Reel, add suffix –Z (e.g. MP5030GQH–Z)
TOP MARKING
FE: Product code of MP5030GQH
LL: Lot number
PACKAGE REFERENCE
TOP VIEW
QFN-10 (1.5mmx2mm)
ABSOLUTE MAXIMUM RATINGS (1)
Supply voltage (VIN) ...................... -0.3V to +16V
Output voltage (VOUT).................... -0.3V to +16V
All other pins ................................... -0.3V to +6V
Junction temperature ................................ 150°C
Lead temperature...................................... 260°C
Continuous power dissipation (TA = +25°C)(2) (5)
................................................................... 2.23W
Recommended Operating Conditions (3)
Supply voltage (VIN) .....................3.6V to 14V (4)
Output voltage (VOUT)....................follow with VIN
Output current (IOUT)...............................up to 3A
Operating junction temp. (TJ)....-40°C to +125°C
Thermal Resistance
θJA θJC
QFN-10 (1.5mmx2mm)
EV5030-QH-00C (5) ............... 56 ...... 18 ... °C/W
JESD51-7 (6) ......................... 130 ..... 25 ... °C/W
NOTES:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature TJ (MAX), the junction-to-
ambient thermal resistance θJA, and the ambient temperature
TA. The maximum allowable continuous power dissipation at
any ambient temperature is calculated by PD (MAX) = (TJ
(MAX)-TA)/θJA. Exceeding the maximum allowable power
dissipation produces an excessive die temperature, causing
the regulator to go into thermal shutdown. Internal thermal
shutdown circuitry protects the device from permanent
damage.
3) The device is not guaranteed to function outside of its operating
conditions.
4) For lower VIN applications, refer to the Operation section on
page 10.
5) Measured on EV5030-QH-00C, 2-layer PCB, 58mmx32mm,
2Oz copper.
6) Measured on JESD51-7, 4-layer PCB.
MP5030 Rev. 1.01
www.MonolithicPower.com
9/27/2018
MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2018 MPS. All Rights Reserved.
2


Features The Future of Analog IC Technology MP50 30 USB Charging Port Controller with Cu rrent Limit Switch, Supporting Type-C 5 V and QC 3.0 Modes DESCRIPTION The MP5 030 integrates a USB current-limit swit ch and charging port identification cir cuit. The MP5030 achieves 3A of continu ous output current over a wide input su pply range. The output of the USB switc h is current-limit programmable. The MP 5030 supports DCP schemes for battery c harging specification (BC1.2), divider mode, 1.2V/1.2V mode, and quick charge specification (QC 3.0) without the need for external user interaction. The MP5 030 also supports Type-C 5V @ 3A DFP mo de. The MP5030 provides linear line dro p compensation. Full protection feature s include hiccup current limiting, inpu t over-voltage protection (OVP), and th ermal shutdown. The MP5030 requires a m inimal number of readily available, sta ndard, external components to complete the USB switch and charging mode auto-d etection solution. The MP5030 is available in a QFN-10 (1.5mmx2.
Keywords MP5030, datasheet, pdf, MPS, USB, Charging, Port, Controller, P5030, 5030, 030, MP503, MP50, MP5, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)