A37

A37 / SMA37 Cascadable Amplifier 10 to 2000 MHz Features  HIGH OUTPUT LEVEL: +15 dBm (TYP.)  HIGH THIRD ORDER I.P.: +28 dBm (TYP.)  WIDE POWER SUPLLY RANGE: +5 TO +15 VOLTS Description The A37 RF amplifier is a discrete thin film hybrid design, which incorporates the use of thin film manufacturing processes for accurate performance and high reliability. This single stage bipolar transistor feedback amplifier design displays impressive performance over a broadband frequency range. An active DC biasing network is used for temperature-stable performance, in addition to an RF Choke, used for power supply decoupling. Both TO-8 and Surface Mount packages are hermetically sealed, and MIL-STD-883 environmental screening is available. Ordering Information Product Image Rev. V3 Part Number Package A37 TO-8 SMA37 Surface Mount CA37 ** SMA Connectorized ** The connectorized version is not RoHs compliant. Electrical Specifications: Z0 = 50, VCC = +15 VDC Absolute Maximum Ratings Parameter Frequency Small Signal Gain (min) Gain Flatness (max) Reverse Isolation Noise Figure (max) Power Output @ 1 dB comp. (min) IP3 IP2 Units MHz dB dB dB dB dBm dBm dBm Typical 25ºC 5-2100 10.0 ±0.3 14 6.8 15.0 +28 +36 Guaranteed 0º to 50ºC -54º to +85ºC* 10-2000 10-2000 8.5 8.0 ±0.8 ±1.0 7.5 14.0 8.0 13.5 Parameter Absolute Maximum Storage Temperature -62ºC to +125ºC Case Temperature 125ºC DC Voltage +17 V Continuous Input Power +13 dBm Short Term Input power (1 minute m...