MIXED SIGNAL MICROCONTROLLER
MSP430C33x, MSP430P337A MIXED SIGNAL MICROCONTROLLERS
D Low Supply Voltage Range 2.5 V – 5.5 V D Low Operation Current,...
Description
MSP430C33x, MSP430P337A MIXED SIGNAL MICROCONTROLLERS
D Low Supply Voltage Range 2.5 V – 5.5 V D Low Operation Current, 400 mA at 1 MHz,
3V
D Ultralow-Power Consumption:
– Standby Mode: 2 µA – RAM Retention Off Mode: 0.1 µA
D Five Power-Saving Modes D Wake-Up From Standby Mode in 6 µs D 16-Bit RISC Architecture, 300 ns Instruction
Cycle Time
D Single Common 32 kHz Crystal, Internal
System Clock up to 3.8 MHz
D Integrated LCD Driver for up to 120
Segments
D Integrated Hardware Multiplier Performs
Signed, Unsigned on Multiply, and MAC
Operations for Operands up to 16 × 16 Bits
D Serial Communication Interface (USART),
Select Asynchronous UART or
Synchronous SPI by Software
SLAS227A – OCTOBER 1999 – REVISED JUNE 2000
D Slope A/D Converter Using External
Components
D 16-Bit Timer With Five Capture/Compare
Registers
D Serial Onboard Programming D Programmable Code Protection by Security
Fuse
D Family Members Include:
– MSP430C336 – 24 KB ROM, 1 KB RAM
– MSP430C337 – 32 KB ROM, 1 KB RAM
– MSP430P337A – 32 KB OTP, 1 KB RAM
D EPROM Version Available for Prototyping:
– PMS430E337A
D Available in the Following Packages:
– 100 Pin Quad Flat-Pack (QFP)
– 100 Pin Ceramic Quad Flat-Pack (CFP)
(EPROM Version)
description
The Texas Instruments MSP430 is an ultralow-power mixed signal microcontroller family consisting of several devices featuring different sets of modules targeted to various applications. The controller is designed to be battery-operated for an extended application lifeti...
Similar Datasheet