5V VARIABLE OUTPUT SWING DIFFERENTIAL RECEIVER
SY NERGY
SEMICONDUCTOR
5V VARIABLE OUTPUT SWING DIFFERENTIAL RECEIVER
SY100EL16S
SY100EL16S
FEATURES
s 5V power suppl...
Description
SY NERGY
SEMICONDUCTOR
5V VARIABLE OUTPUT SWING DIFFERENTIAL RECEIVER
SY100EL16S
SY100EL16S
FEATURES
s 5V power supply options s High bandwidth output transitions s Internal 75KΩ pull-down resistors on inputs s Functionally equivalent to SY10/100EL16V with
variable output swing s Improved output waveform characteristics s ESD protection of 2000V s Available in 8-pin (3mm) TSSOP
PIN CONFIGURATION/BLOCK DIAGRAM
VCTRL 1 D2 D3
VBB 4
9 VCC 7Q 6Q 5 VEE
TOP VIEW
DESCRIPTION
The SY100EL16S is a differential receiver with variable output swing. This device is functionally equivalent to the EL16V, with an additional input that control the output amplitude.
The operating range of the EL16S control input is from VBB (max. swing) to VCC (min. swing). Control of the output swing can be obtained by a variable resistor between the VBB pin and VCC with the wiper driving VCTRL.
The EL16S provides a VBB output for either singleended use or as a DC bias for AC coupling to the device. The VBB pin should be used only as a bias for the EL16S as its current sink/source capability is limited. Whenever used, the VBB pin should be bypassed to VCC via a 0.01µF capacitor.
Under open input conditions (pulled to VEE), internal input clamps will force the Q output LOW.
PIN NAMES
Pin D, D Q, Q VBB VCTRL
Function Data Inputs Data Outputs Reference Voltage Output Output Swing Control
TYPICAL VOLTAGE OUTPUT SWING
© 1999 Micrel-Synergy
VOLTAGE SWING (%)
100 90 +105°C 80 70 60 +45°C 50 40 30 20 -40°...
Similar Datasheet