1.0 Ampere. 1F2 Datasheet

1F2 Ampere. Datasheet pdf. Equivalent


Part 1F2
Description FAST SWITCHING PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)
Feature 1F1 THRU 1F7 FAST SWITCHING PLASTIC RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere FEATUR.
Manufacture Pan Jit International Inc.
Datasheet
Download 1F2 Datasheet


MCC • • • • •   omponents 21201 Itasca Stre 1F2 Datasheet
1F2 Datasheet
1F1 THRU 1F7 FAST SWITCHING PLASTIC RECTIFIER VOLTAGE - 50 t 1F2 Datasheet
1F1 THRU 1F7 FAST SWITCHING PLASTIC RECTIFIER Reverse Voltag 1F2 Datasheet
1F1 1.0 AMP FAST RECOVERY RECTIFIERS THRU 1F7 VOLTAGE RAN 1F2 Datasheet
RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION 1F1 THRU 1F7 1F2 Datasheet
DC COMPONENTS CO., LTD. N NCAPGDGCN OMCAG?IGOPO 4D4 PFNQ 4D 1F2 Datasheet
1F1 THRU 1F7 MINIATURE FAST RECOVERY RECTIFIER REVERSE VOL 1F2 Datasheet
1F1 thru 1F7 Fast Recovery Rectifiers Plastic Passivation J 1F2 Datasheet
)) 9ROWDJH5DQJHWR9  1F2 Datasheet
Recommendation Recommendation Datasheet 1F2 Datasheet




1F2
1F1 THRU 1F7
FAST SWITCHING PLASTIC RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
FEATURES
l High current capability
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O Utilizing
Flame Retardant Epoxy Molding Compound
l 1.0 ampere operation at TA=55 ¢J with no thermal runaway
l Fast switching for high efficiency
l Exceeds environmental standards of MIL-S-19500/228
l Low leakage
R-1
MECHANICAL DATA
Case: Molded plastic, R-1
Terminals: Plated axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.0064 ounce, 0.181 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current .375"(9.5mm) lead length at TA=55 ¢J
Peak Forward Surge Current 8.3ms single half sine
wave superimposed on rated load(JECEC method)
Maximum Forward Voltage at 1.0A DC
Maximum Reverse Current TJ=25 ¢J
at Rated DC Blocking Voltage TJ=100 ¢J
Typical Junction capacitance (Note 1) CJ
Typical Thermal Resistance (Note 3) R £KJA
Maximum Reverse Recovery Time(Note 2)
Operating and Storage Temperature Range TJ,TSTG
1F1 1F2 1F3 1F4 1F5 1F6 1F7 UNITS
50 100 200 400 600 800 1000 V
35 70 140 280 420 560 700 V
50 100 200 400 600 800 1000 V
1.0 A
30 A
1.3 V
5.0 £g A
500 £g A
12 PF
67 ¢J /W
150 150 150 150 250 500 500
-55 to +150
ns
¢J
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
2. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A
3. Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B.
mounted with 0.22×0.22"(5.5×5.5mm) copper pads



1F2
RATING AND CHARACTERISTIC CURVES
1F1 THRU 1F7
+0.5A
0
-0.25
trr
NOTE:1.Rise Time = 7ns max.
Input Impedance = 1 megohm. 22pF
2.Rise Time = 10ns max.
Source Impedance = 50 Ohms
-1.0
SET TIME
BASE FOR
50 ns/cm
1cm
Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
10
1
TJ = 25¢J
0.1
PULSE
WIDTH = 300£gs
1% DUTY CYCLE
0.01
0.2 0.4 0.6 0.8 1.0 1.2 1.4
INSTANTANEOUS FORWARD VOLTAGE, VOLTS
Fig. 2-TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
1.6
1.4 MAXIMUM AVERAGE CURRENT RATING
1.2 SINGLE PHASE, HALF WAVE 60Hz
1.0 RESISTIVE OR INDUCTIVE
.8 LOAD .375"(9.5mm) LEAD LENGTHS
.6
.4
.2
0
0 20 40 60 80
120 140 160 180
AMBIENT TEMPERATURE, ¢J
Fig. 3-FORWARD CURRENT DERATING CURVE
100
TJ = 25¢J
10
1
1 4 10
REVERSE VOLTAGE, Vdc
Fig. 4-TYPICAL JUNCTION CAPACITANCE
30
24
18
12
6
12
4 6 8 10 20 40 60 80 100
NUMBER OF CYCLES AT 60Hz
Fig. 5-PEAK FORWARD SURGE CURRENT







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)