TL75LP08Q

ą Very Low-Dropout Voltage . . . Less Than 400 mV at 300 mA Standby Mode Reduces Current to a Maximum of 150 µA Output Regulated to Within ± 2% Over Full Temperature Range Packaged in Thin Shrink Small-Outline Package Only 10-µF Load Capacitor Required to Maintain Regulation at IO = 300 mA description The TL75LPxxQ devices are low-dropout voltage regulators specifically targeted for use in portable applications. These devices generate fixed output voltages at loads of up to 300 mA with only 400-mV dropout over the full temperature range. TL75LPxxQ SERIES TL75LPxxY SERIES LOWĆDROPOUT VOLTAGE REGULATORS SLVS073A − SEPTEMBER 1992 − REVISED AUGUST 1995 PW PACKAGE (TOP VIEW) GND/HEAT SINK GND/HEAT SINK GND/HEAT SINK NC NC ENABLE NC INPUT INPUT INPUT 1 2 3 4 5 6 7 8 9 10 20 NC 19 NC 18 NC 17 NC 16 NC 15 OUTPUT 14 OUTPUT 13 NC 12 NC 11 NC GND/HEAT SINK − These terminals have an internal connection to ground and must be grounded. NC − No internal connection † The PW package is only available in left-end taped and reeled (order device TL75LPxxQPWLE). Low-dropout voltage regulators are commonly used in battery-powered systems such as analog typical application schematic and digital cellular phones. The TL75LPxx family of regulators feature a TTL/CMOS-compatible enable terminal, which can be used to switch the device into standby mode. This feature reduces power consumption when the instrument is not VBAT 0.1 µF INPUT OUTPUT TL75LPxxQ GND/ ENABLE HEAT SINK VO ± ...