PLASTIC RECTIFIER. 1F6 Datasheet

1F6 RECTIFIER. Datasheet pdf. Equivalent


Part 1F6
Description FAST SWITCHING PLASTIC RECTIFIER
Feature 1F1 THRU 1F7 FAST SWITCHING PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.
Manufacture GOOD-ARK Electronics
Datasheet
Download 1F6 Datasheet


MCC • • • • •   omponents 21201 Itasca Stre 1F6 Datasheet
1F6 Datasheet
1F1 THRU 1F7 FAST SWITCHING PLASTIC RECTIFIER VOLTAGE - 50 t 1F6 Datasheet
1F1 THRU 1F7 FAST SWITCHING PLASTIC RECTIFIER Reverse Voltag 1F6 Datasheet
1F1 1.0 AMP FAST RECOVERY RECTIFIERS THRU 1F7 VOLTAGE RAN 1F6 Datasheet
RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION 1F1 THRU 1F7 1F6 Datasheet
DC COMPONENTS CO., LTD. N NCAPGDGCN OMCAG?IGOPO 4D4 PFNQ 4D 1F6 Datasheet
1F1 THRU 1F7 MINIATURE FAST RECOVERY RECTIFIER REVERSE VOL 1F6 Datasheet
1F1 thru 1F7 Fast Recovery Rectifiers Plastic Passivation J 1F6 Datasheet
)) 9ROWDJH5DQJHWR9  1F6 Datasheet
Recommendation Recommendation Datasheet 1F6 Datasheet




1F6
Features
High current capability.
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0 utilizing
Flame retardant epoxy molding compound.
1.0 ampere operation at TA=55 with no thermal runaway
Fast switching for high efficiency
Low leakage
1F1 THRU 1F7
FAST SWITCHING PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.0 Ampere
Mechanical Data
Case: Molded plastic, R-1
Terminals: Plated axial leads, solderable per
MIL-STD-202, method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.007 ounce, 0.20 gram
D IM E N S IO N S
inches
mm
DIM Note
Min.
Max.
Min.
Max.
A
0 .11 4
0.138
2.9
3.5
B
0.095
0.099
2.42
2.51
C
0.020
0.024
0.5
0.6
D 1.000 - 25.40 -
Maximum Ratings and Electrical Characteristics
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Symbols 1F1 1F2 1F3 1F4 1F5 1F6 1F7 Units
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55
Peak forward surge current
8.3mS single half sine-wave superimposed
on rated load (MIL-STD-750D 4066 method)
VRRM
VRMS
V
DC
I(AV)
IFSM
50 100 200 400 600 800 1000 Volts
35 70 140 280 420 560 700 Volts
50 100 200 400 600 800 1000 Volts
1.0 Amp
30.0
Amps
Maximum forward voltage at 1.0A DC
Maximum DC reverse current
at rated DC blocking voltage
TTJJ==12050
Maximum reverse recovery time (Note 1)
Typical junction capacitance (Note 2)
VF
IR
Trr
CJ
1.30
5.0
150.0
150 250
10.0
500
Volts
A
nS
F
Typical thermal resistance (Note 3)
R
JA
67.0
/W
Operating and storage temperature range
TJ, TSTG
-55 to +150
Notes:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 VDC
(3) Thermal resistance from junction to ambient and from junction to lead 0.375” (9.5mm) lead length, P.C.B. mounted with 0.22X0.22” (5.5X5.5mm) copper pads
1



1F6
RATINGS AND CHARACTERISTIC CURVES
2







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)