SN74LS173A Datasheet: 4-BIT D-TYPE REGISTERS





SN74LS173A 4-BIT D-TYPE REGISTERS Datasheet

Part Number SN74LS173A
Description 4-BIT D-TYPE REGISTERS
Manufacture etcTI
Total Page 19 Pages
PDF Download Download SN74LS173A Datasheet PDF

Features: SN54173, SN54LS173A, SN74173, SN74LS173A 4-BIT D-TYPE REGISTERS WITH 3-STATE OU TPUTS SDLS067A – OCTOBER 1976 – REV ISED JUNE 1999 D 3-State Outputs Inter face Directly With System Bus D Gated O utput-Control LInes for Enabling or Dis abling the Outputs D Fully Independent Clock Virtually Eliminates Restrictions for Operating in One of Two Modes: – Parallel Load – Do Nothing (Hold) D For Application as Bus Buffer Registers D Package Options Include Plastic Smal l-Outline (D) Packages, Ceramic Flat (W ) Packages, Ceramic Chip Carriers (FK), and Standard Plastic (N) and Ceramic ( J) DIPs SN54173, SN54LS173A . . . J OR W PACKAGE SN74173 . . . N PACKAGE SN74 LS173A . . . D or N PACKAGE (TOP VIEW) M N 1Q 2Q 3Q 4Q CLK GND 1 2 3 4 5 6 7 8 16 VCC 15 CLR 14 1D 13 2D 12 3D 11 4D 10 G2 9 G1 SN54LS173A . . . FK PACK AGE (TOP VIEW) N M NC V CC CLR TYPICA L MAXIMUM TYPE PROPAGATION CLOCK †™173 ’LS173A DELAY TIME 23 ns 18 ns FREQUENCY 35 MHz 50 MHz 3 2 1 20 19 1Q 4 18 1D 2Q 5 17 2D NC 6 16 N.

Keywords: SN74LS173A, datasheet, pdf, etcTI, 4-BIT, D-TYPE, REGISTERS, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

SN54173, SN54LS173A, SN74173, SN74LS173A
4-BIT D-TYPE REGISTERS
WITH 3-STATE OUTPUTS
SDLS067A – OCTOBER 1976 – REVISED JUNE 1999
D 3-State Outputs Interface Directly With
System Bus
D Gated Output-Control LInes for Enabling or
Disabling the Outputs
D Fully Independent Clock Virtually
Eliminates Restrictions for Operating in
One of Two Modes:
– Parallel Load
– Do Nothing (Hold)
D For Application as Bus Buffer Registers
D Package Options Include Plastic
Small-Outline (D) Packages, Ceramic Flat
(W) Packages, Ceramic Chip Carriers (FK),
and Standard Plastic (N) and Ceramic (J)
DIPs
SN54173, SN54LS173A . . . J OR W PACKAGE
SN74173 . . . N PACKAGE
SN74LS173A . . . D or N PACKAGE
(TOP VIEW)
M
N
1Q
2Q
3Q
4Q
CLK
GND
1
2
3
4
5
6
7
8
16 VCC
15 CLR
14 1D
13 2D
12 3D
11 4D
10 G2
9 G1
SN54LS173A . . . FK PACKAGE
(TOP VIEW)
TYPICAL
MAXIMUM
TYPE PROPAGATION
CLOCK
’173
’LS173A
DELAY TIME
23 ns
18 ns
FREQUENCY
35 MHz
50 MHz
3 2 1 20 19
1Q 4
18 1D
2Q 5
17 2D
NC 6
16 NC
description
3Q 7
15 3D
The ’173 and ’LS173A 4-bit registers include
4Q 8
14 4D
9 10 11 12 13
D-type flip-flops featuring totem-pole 3-state
outputs capable of driving highly capacitive
or relatively low-impedance loads. The
high-impedance third state and increased
NC – No internal connection
high-logic-level drive provide these flip-flops with
the capability of being connected directly to and
driving the bus lines in a bus-organized system without need for interface or pull-up components. Up to 128 of
the SN74173 or SN74LS173A outputs can be connected to a common bus and still drive two Series 54/74 or
54LS/74LS TTL normalized loads, respectively. Similarly, up to 49 of the SN54173 or SN54LS173A outputs can
be connected to a common bus and drive one additional Series 54/74 or 54LS/74LS TTL normalized load,
respectively. To minimize the possibility that two outputs will attempt to take a common bus to opposite logic
levels, the output control circuitry is designed so that the average output disable times are shorter than the
average output enable times.
Gated enable inputs are provided on these devices for controlling the entry of data into the flip-flops. When both
data-enable (G1, G2) inputs are low, data at the D inputs are loaded into their respective flip-flops on the next
positive transition of the buffered clock input. Gate output-control (M, N) inputs also are provided. When both
are low, the normal logic states (high or low levels) of the four outputs are available for driving the loads or bus
lines. The outputs are disabled independently from the level of the clock by a high logic level at either
output-control input. The outputs then present a high impedance and neither load nor drive the bus line. Detailed
operation is given in the function table.
The SN54173 and SN54LS173A are characterized for operation over the full military temperature range of
–55°C to 125°C. The SN74173 and SN74LS173A are characterized for operation from 0°C to 70°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
•POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 1999, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
1

                    
                    






Index : 0  1  2  3   4  5  6  7   8  9  A  B   C  D  E  F   G  H  I  J   K  L  M  N   O  P  Q  R   S  T  U  V   W  X  Y  Z
@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)