JINLONG MACHINERY & ELECTRONICS CO., LTD. www.jinlong-machinery.com
[email protected]
PRODUCT SPECIFICATION
/Spec No. / Product Description /Part No. /Date /Designed by
2015.06.10
Coin type vibration motor
/Checked by 2015.06.10
/Approved by 2015.06.10
PRODUCT SPECIFICATION
1. /Importance Notes
Contents
2. /Revised Record 3. /Application 4. /Operation condition 5. /Measuring Conditions
6. /Electrical Characteristics 7. /Mechanical Characteristic 8. /Reliability Test 9. /Requirement After Reliable Test 10. /Cautions for Use 11. /Packing Require 12. /Motor Outline Drawing
No 2/9
3/9
3/9 4/9 4/9 4/9
5/9 5/9 6/9 6/9 7/9 8/9 9/9
www.jinlong-machinery.com
PRODUCT SPECIFICATION
No 3/9
1. Importance Notes:
1) /
If there is any argument on motor performance and/or life, judgment is to be made base on this specification only.
2)
Customer has the responsibility to ensure that the motor can satisfy the requirement of your application.
3)
In the event that an official specification is not present by customer; this document will specify the agreed technical specification .
4) / /
Within the limitation to satisfy this specification, KOTL has the convenience to change the materials, sizes and shapes of components of the motor for the purpose of improving quality, and/or performance, and/or production efficiency.
5) Conform to the Standard of Prohibition in Using Hazardous Substances in new version by Jinlong Machinery & Electronics Co., Ltd
6)
After the receipt of this specification, customer should send a signed copy to KOTL before you issued purchase order for the confirmation on acknowledgement. KOTL regard it as the receipt of this specification acknowledged if customer fails to return the confirmation to us within the described period.
2. /Revised Record
Rev. /Date
/Reason for change
Designed Checked Approval
www.jinlong-machinery.com
PRODUCT SPECIFICATION
No 4/9
3. /Application
C0720B .
This specification applies to coin type permanent-magnetic motors DC model C0720B.
4. /Operating Condition
/Item 4-1
/Rated voltage
/Specifications 3.0V DC
4-2
/Operating voltage
2.7~3.3V DC
4-3 /Rotation
4-4
/ Operating environment
4-5
/ Storage environment
5. /Measuring Conditions /Item
5-1 /Temperature
5-2 /Humidity
CW (clockwise) or CCW (counter clockwise)
-20 60 ,
/Ordinary Humidity:65±20%RH
-30 70 ,
/Ordinary Humidity:65±20%RH
/Specification 25±3 65±20% RH
5-3 /Power supply
/Constant Power supply 3.0V DC.
www.jinlong-machinery.com
PRODUCT SPECIFICATION
6. Electrical Characteristics
No 5/9
/Item
6-1
/ Rated speed
6-2
/ Rated current
6-3
/ Starting voltage
/Specification 10000rpm MIN 80mA Max 2.5V DC Max
6-5
/ Insulation resistance
10M Min
6-6 7.
/ 43 Terminal resistance
15%
/Mechanical Characteristic
/Condition
/At rated voltage.
/ 100V
/At DC 100V between wire and case. At 25
/Item
/Specification
/Vibration
/JIG
7-1
/Sensor
/Mechanical noise
50dB (A) Max.
/At rated voltage. /Back ground noise 28dB (A) Max.
7-2
M otor Test block
Foam
www.jinlong-machinery.com
PRODUCT SPECIFICATION
8. NO.
/Reliability Test Item
Test condition
No 6/9
Requirements 2
/ Rated voltage: 3.0V DC
9-1 9-2 98-3
/ Test mode: 2s On, 2s Off, as one
./After 2 hours
8-1 /Life time cycle.
exposure in ordinary
/ Test cycle:30000 cycles
temperature and humidity, Motors
shall be approved as
specified in item 9-1,
9-2, 9-3.
8-2 /Storage in cold
8-3 /Storage in heat
8-4 /High Humidity exposure
/Temperature: –40 /Time: 96h
/Temperature: 80 /Time: 96h
/Temperature:
+60
/Humidity:
90%RH
/ Exposure time: 168h / No condensation of moisture
2
9-1 9-2 98-3 ./After 2 hours exposure in ordinary temperature and humidity, Motors shall be approved as specified in item 9-1, 9-2, 9-3.
8-5 /Vibration
/Displacement:
1.5mm (p-p)
/Frequency:
10~55Hz
/Acceleration: 22m/s2
/Period: 10
(10~55~10Hz)/
10 Minutes log sweep
(10~55~10Hz)
/Condition:
3
10 Samples
shall be applied for a period of 10 minutes in
three axial directions.
2
9-1 9-2 98-3 ./After 2 hours exposure in ordinary temperature and humidity, Motors shall be approved as specified in item 9-1, 9-2, 9-3.
9. NO. 9-1 9-2 9-3
/Requirement After Reliable Test /Item
/Rated speed
/Rated Current
/Starting voltage
2.5V
/Specification 30% /Initial data 30% 30% /Initial data 30%
www.jinlong-machinery.com
10. /Cautions
PRODUCT SPECIFICATION
No 7/9
10-1 ,
Unless it is used in accordance with the specifications, the performance and life may be considerably reduced. Due attention should be paid to voltage and range for use.
10-2 , 1. 2. , H2S SO2 NO2 Cl2 3. Advice uses this motor within 6 months as avoiding as possible.Avoid use or save the motor in the
following environment. 1. High temperature and high humidity area 2. Corrosive gas such as H2S, SO2, NO2, Cl2. 3. Dusty area.
10-3
Due attention must be paid to the handling and working environments because such objects as iron powder if attracted b.