Document
05008
Only One Name Means ProTek’Tion™
HIGH POWERED MULTI-LINE TVS ARRAY
DLZ-5 - DLZ-30CA RTCA DO-160G COMPLIANT PRODUCT
DESCRIPTION
The DLZ Series of silicon transient voltage suppressors (TVS) are available in a ceramic, hermetically sealed dual-in-line package. This series is designed to protect aerospace, standard TTL and MOS bus lines in applications where NEMP, ESD and other induced voltage surges can damage or upset voltage sensitive circuitry. The DLZ Series has a peak pulse power rating of 1,300 Watts for an 8/20µs waveshape. This devices meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements.
16 PIN CDIP PACKAGE
FEATURES
• RTCA DO-160G COMPLIANT PRODUCT • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-
Gnd) & Level 3(Line-Line) • MIL-STD-461 Compatible • Satisfies Military NEMP Requirements • 1,300 Watts Peak Pulse Power per Line (tp = 8/20µs) • Unidirectional & Bidirectional Configurations • ESD Protection > 25 kilovolts • Internal Common Ground • Available in Multiple Voltages • Protects up to 15 Lines • RoHS Compliant • REACH Compliant
APPLICATIONS
• Military & Aerospace Data Line Protection • RS-232 & RS-423 Data Lines • Microprocessor Based Equipment • Multiple Data & Power Bus Line Protection
MECHANICAL CHARACTERISTICS
• Hermetically Sealed Ceramic 16 Pin Dual-In-Line (DIP) Package • Approximate Weight: 3.2 grams • Flammability Rating UL 94V-0 • Screening Per MIL-PRF-19500 Available Upon Request: H1 - 100 % Screening (Test Plans 05227 & 05229) H2 - 100% Screening (05228 & 05230) • Screening to DESC Drawing 94029 (Bidirectional) and 94030 (Unidi-
rectional)
PIN CONFIGURATIONS
16 15 14 13 12 11 10
9
1234567 UNIDIRECTIONAL
16 15 14 13 12 11 10
8 9
05008.R12 8/18
12345678 BIDIRECTIONAL
Page 1
ISO 9001: 2015 CERTIFIED
05008
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
DLZ-5 - DLZ-30CA RTCA DO-160G COMPLIANT PRODUCT
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
SYMBOL
Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature Forward Surge Rating (1/120 seconds) Unidirectional
PPP TL TSTG IF
VALUE 1,300 -55 to 150 -55 to 150
10
UNITS Watts
°C °C Amps
PART NUMBER (Note 1)
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
RATED STAND-OFF VOLTAGE
MINIMUM BREAKDOWN
VOLTAGE
MAXIMUM CLAMPING VOLTAGE
(Fig. 2)
MAXIMUM CLAMPING VOLTAGE
(Fig. 2)
MAXIMUM LEAKAGE CURRENT
VVOWLMTS
@1mA VVO(LBRT)S
@ IP = 1A VOVLCTS
DLZ-5
5.0
6.0 10.2
DLZ-5A
5.0
6.0
9.5
DLZ-12
12.0
13.3
21.1
DLZ-12A
12.0
13.3
19.1
DLZ-17
17.0
19.2
30.4
DLZ-17A
17.0
19.2
27.5
DLZ-24
24.0
26.7
42.3
DLZ-24A
24.0
26.7
38.3
DLZ-30
30.0
33.3
52.8
DLZ-30A
30.0
33.3
47.8
DLZ-8C
8.0
8.5 13.4
DLZ-8CA
8.0
8.5 12.2
DLZ-13C
13.0
14.4
22.8
DLZ-13CA
13.0
14.4
20.6
DLZ-19C
19.0
21.6
34.2
DLZ-19CA
19.0
21.6
31.0
DLZ-30C
30.0
33.3
52.8
DLZ-30CA
30.0
33.3
47.8
NOTES 1. tclamping (0V to VBR min): Less than 1x10-12 seconds (10x10-9 seconds bidirectional).
@ IP = 10A VOVLCTS 12.5 10.6 26.0 23.5 37.4 33.9 52.1 47.2 65.0 58.8 16.6 15.0 28.1 25.4 42.1 38.1 65.0 58.8
@µVIDAWM 200 200 2 2 2 2 2 2 2 2 10 10 4 4 4 4 4 4
MAXIMUM CAPACITANCE
TEMPERATURE COEFFICIENT
OF V(BR)
@0V, 1MHz C pF 880 880 440 440 330 330 275 275 220 220 440 440 385 385 275 275 165 165
mqVV/(B°RC) 5 5 18 18 20 20 31 31 39 39 9 9 18 18 24 24 39 39
05008.R12 8/18
Page 2
ISO 9001: 2015 CERTIFIED
05008
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
100
DLZ-5 - DLZ-30CA RTCA DO-160G COMPLIANT PRODUCT
FIGURE 1 PEAK PULSE POWER VS PULSE TIME
PPP - Peak Pulse Power - kilowatts
10
1300W, 8/20µs Waveform
1
0.1 0.1
1
10 100 td - Pulse Duration - µs
1,000
10,000
IPP - Peak Pulse Current - % of IPP
120 100
80 60 40 20
0 0
FIGURE 2 PULSE WAVE FORM
tf Peak Value IPP
e-t
TEST
WAVEFORM
PARAMETERS
ttfd
= =
8µs 20µs
td = t/(IPP/2)
5 10 15 20 25 t - Time - µs
30
% Of Rated Power
FIGURE 3 100 POWER DERATING CURVE
Peak Pulse Power 8/20µs
80
60
40
20
Average Power
0 0 25 50 75 100 125 150 TA - Ambient Temperature - °C
05008.R12 8/18
Page 3
ISO 9001: 2015 CERTIFIED
05008
Only One Name Means ProTek’Tion™
16 PIN CDIP PACKAGE INFORMATION
OUTLINE DIMENSIONS
DIM
MILLIMETERS MIN MAX
INCHES MIN MAX
A 22.72
23.48
0.895
0.925
B 11.43
12.19
0.450
0.480
C - 4.87 - 0.192
D 7.36
7.84
0.290
0.310
E - 0.635 - 0.025
F 4.19
5.21
0.165
0.205
G 2.42
2.66
0.095
0.105
H 0.33
0.57
0.023
0.013
I 0.88
1.12
0.035
0.045
NOTES 1. Dimensions are exclusive of mold flash and metal burrs. 2. Controlling dimensions in inches. 3. Package sealed with ceramic or metal lid.
DLZ-5 - DLZ-30CA RTCA DO-160G COMPLIANT PRODUCT
AC
Pin 1 Pin .